Close
All Categories
    Filters
    Preferences
    Search

    144mm T-Slot Extrusion

    The Studica T-Slot Extrusion is available in 10 different lengths from 48mm to 1000mm. It is strong while light weight. It can be easily cut to your own custom size. It has a 14mm through hole that will fit the Studica 6mmID x 14mmOD Flanged Bearing or Bronze Bushing. It uses the M3 T-Slot Nut Hammer Head Series 20.  It also has four M3 threaded holes on each end. Use it as structure on infinite applications.

    Specifcations,

    • Material:  6061-T6 Aluminum
    • Length: 144mm
    • Weight: 0.38kg
    • Step File
    MFR Part #: 76126
    $2.99
    Availability: In stock
    Write your own review
    • Product can be reviewed only after purchase
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent
    Customers who bought this item also bought

    240mm U-Channel

    #76014
    $9.99
    ( 591 In stock)

    The Studica U Channel is 3mm thick and has a 48mm x 48mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Height - 48mm
    • Width - 48mm
    • Length - 240mm
    • Weight - 206gms
    • Hole pattern - 5
    • Step File

     

    Linear Servo RC Actuator 50S-95N

    #75010
    $64.99
    (In stock)

    The Studica Linear Servo RC Actuator 50-50 is a new Servo motor which has a stroke of 50mm. It works the same way as the any standard rotary servo but in a linear movement. It uses the same 2.54mm Dupont 3-Pin Female wire connector and can be controlled with an RC receiver or any device that controls a servo. Includes mounting brackets.

    Linear Servo RC Actuator 140-200

    #75014
    $69.99
    (In stock)

    The Studica Linear Servo RC Actuator 140-200 is a new Servo motor which has a stroke of 140mm. It works the same way as the any standard rotary servo but in a linear movement. It uses the same 2.54mm Dupont 3-Pin Female wire connector and can be controlled with an RC receiver or any device that controls a servo. Includes mounting brackets.

    20mm OD Round Groove Pulley

    #76235
    $4.49
    ( 149 In stock)

    These round groove pulleys are also referred to as U groove pulleys. They are made of 6061-T6 Aluminum with a D-Shaft hole through of 6mm, and 2 set screws for ultimate strength. Use it with the 5mm Round Belt and for gearing up or down combine them with the other round groove pulleys that range from 10mm to 60mm.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Bore: 6mm
    • Belt Diameter: 20mm
    • Step File

    96mm U-Channel (2 pack)

    #76017-2
    $9.99
    ( 963 In stock)

    The Studica U Channel is 3mm thick and has a 48mm x 48mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Height - 48mm
    • Width - 48mm
    • Length - 96mm
    • Weight - 80gms each
    • Hole pattern - 2
    • Step File

     

    30 Tooth Bevel Gear x 1-to-1 Set (2 pack)

    #76219-2
    $29.99
    ( 689 In stock)

    Used to change motor to axle motion 90 degrees. This can be used in between the U-channel.

    Specifications:

    • Material: Steel
    • Number of teeth: 30
    • Set of 2 for 1-1 drives
    • Step File

    96mm Low Profile U-Channel

    #76032
    $3.99
    ( 589 In stock)

    The Studica Low Profile U Channel is 3mm thick and has a 48mm x 14mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Height - 14mm
    • Width - 48mm
    • Length - 96mm
    • Hole pattern - 2
    • Step File