Close
All Categories
    Filters
    Preferences
    Search

    Motion

    Motion

    View as Grid List
    Sort by
    Display per page

    #25 Chain with Master Links

    #76230
    $14.99
    ( 478 In stock)

    The #25 Chain with Master Links  set works with any of the Studica sprockets and other #25 sprockets. It includes 4 master links for creating various lengths of the chain.

    Specifications:

    10 Tooth 9mm wide XL Timing Belt (1 meter closed)

    #76233
    $4.99
    ( 972 In stock)

    The XL series belt is compatible with the 6mm, 10 tooth XL pulley.

    Specifications:

    • Material: Neoprene with Fiberglass cords
    • Length: 1 meter
    • Width: 9mm
    • Closed loop

    10mm OD Round Groove Pulley

    #76234
    $3.99
    ( 161 In stock)

    These round groove pulleys are also referred to as U groove pulleys. They are made of 6061-T6 Aluminum with a D-Shaft hole through of 6mm, and 2 set screws for ultimate strength. Use it with the 5mm Round Belt and for gearing up or down combine them with the other round groove pulleys that range from 10mm to 60mm.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Bore: 6mm
    • Belt Diameter: 10mm
    • Step File

    1-1 Motor Kit - 5mm Hex Shaft Kit

    #76289
    $7.99
    ( 486 In stock)

    Sometimes you have the need for increased RPM. This 1:1 motor kit can be used with the Studica Maverick or any FTC legal motor such as the Neverest Classic (6600 RPM) or the REV HD Hex motor (6000RPM). The kit includes a faceplate which supports the Studica Robotics building platform. The shaft is press-fit onto the motor's shaft. It is recommended that the shaft be supported by a bearing (we recommend the 76302 for the Studica building system).

     

    Whether you are constructing an intake, designing a shooter, or creating some other high-speed design, this 1:1 option allow you to get the full motor RPM output.

     

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Step File

    1-1 Motor Kit - 6mm D-Shaft Kit

    #76290
    $7.99
    ( 482 In stock)

    Sometimes you have the need for increased RPM. This 1:1 motor kit can be used with the Studica Maverick or any FTC legal motor such as the Neverest Classic (6600 RPM) or the REV HD Hex motor (6000RPM). The kit includes a faceplate which supports the Studica Robotics building platform. The shaft is press-fit onto the motor's shaft. It is recommended that the shaft be supported by a bearing (we recommend the 76302 for the Studica building system).

     

    Whether you are constructing an intake, designing a shooter, or creating some other high-speed design, this 1:1 option allow you to get the full motor RPM output.

     

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Step File

    128 Tooth Gear

    #76222
    $19.99
    ( 255 In stock)

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness: 6.35mm
    • Hole Diameter: 14mm
    • Number of teeth: 128
    • Step File

     

    13 Tooth Bevel Gear (2 pack)

    #76223-2
    $13.99
    ( 544 In stock)

    Specifications:

    • Material: 6061-T6 Aluminum
    • Number of teeth: 13
    • Step File

     

    20 Tooth GT2-6mm Timing Belt Pulley

    #76450
    $7.99
    ( 1618 In stock)

    The 20 Tooth GT2-6mm Timing Belt Pulley can be used with any of the GT2 belts. 

    Specifications:

    • 20 Tooth Timing Pulley
    • 6mm Bore 
    • Material: 6061 T6 Aluminum
    • Step File

    24 Tooth - Sprocket (2 pack)

    #76226-2
    $10.99
    ( 1443 In stock)

    Specifications:

    • Material: 6061-T6 Aluminum
    • Use with #25 Chain
    • Number of teeth: 24
    • Addendum - 52.04mm
    • Dedendum - 45.25mm
    • Pitch - 48.645
    • Width - 2.5mm

     

    26 Tooth Bevel Gear (2 pack)

    #76224-2
    $14.99
    ( 503 In stock)

    Specifications:

    • Material: 6061-T6 Aluminum
    • Number of teeth: 26
    • Step File

     

    30 Tooth Bevel Gear x 1-to-1 Set (2 pack)

    #76219-2
    $29.99
    ( 647 In stock)

    Used to change motor to axle motion 90 degrees. This can be used in between the U-channel.

    Specifications:

    • Material: Steel
    • Number of teeth: 30
    • Set of 2 for 1-1 drives
    • Step File

    30 Tooth GT2-6mm Timing Belt Pulley

    #76451
    $8.99
    ( 2425 In stock)

    The 30 Tooth GT2-6mm Timing Belt Pulley can be used with any of the GT2 belts. 

    Specifications:

    • 30 Tooth Timing Pulley
    • 6mm Bore 
    • Material: 6061 T6 Aluminum
    • Step File

    32 Tooth - Sprocket (2 pack)

    #76227-2
    $15.99
    ( 432 In stock)

    Specifications:

    • Material: 6061-T6 Aluminum
    • Use with #25 Chain
    • Number of teeth: 32
    • Pitch - 65.1mm
    • Width - 2.5mm
    • Step File

     

    32 Tooth Gear (2 pack)

    #76220-2
    $12.99
    ( 163 In stock)

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness: 6.35mm
    • Hole Diameter: 14mm
    • Step File

     

    40 Tooth - Sprocket

    #76228
    $9.49
    ( 1041 In stock)

    Specifications:

    • Material: 6061-T6 Aluminum
    • Use with #25 Chain
    • Number of teeth: 40
    • Addemdum - 84.49mm
    • Dedendum - 77.54mm
    • Pitch - 81.015mm
    • Width - 2.5mm
    • Step File

     

    40 Tooth GT2-6mm Timing Belt Pulley

    #76452
    $9.99
    ( 465 In stock)

    The 40 Tooth GT2-6mm Timing Belt Pulley can be used with any of the GT2 belts. 

    Specifications:

    • 40 Tooth Timing Pulley
    • 6mm Bore 
    • Material: 6061 T6 Aluminum
    • Step File

    48 Tooth - Sprocket

    #76229
    $10.99
    ( 509 In stock)

    Specifications:

    • Material: 6061-T6 Aluminum
    • Unse with #25 Chain
    • Number of teeth: 48
    • Addendum - 100.69mm
    • Dedendum - 93.7mm
    • Pitch - 97.195mm
    • Width - 2.5mm
    • Step File

     

    5mm Bore Pinion Pulley 10 Teeth (2 pack)

    #638576
    $4.99 $6.99
    ( 372 In stock)

    The pulleys are .40” inside the flanges to allow for belts up to 3/8” in width. Two set screws using 1.5mm hex key.

    5mm Hex Shaft Hub Kit

    #76288
    $7.99
    ( 443 In stock)

    This Hub allows user that have existing Studica OMNI wheels (Part# 76260) or Mecanum Wheels (Part# 76243) to use REV Robotics 5mm Hex shafts and Hex Motors.

    60 Tooth GT2-6mm Timing Belt Pulley

    #76453
    $10.99
    ( 456 In stock)

    The 60 Tooth GT2-6mm Timing Belt Pulley can be used with any of the GT2 belts. 

    Specifications:

    • 60 Tooth Timing Pulley
    • 6mm Bore 
    • Material: 6061 T6 Aluminum
    • Step File

    64 Tooth Gear (2 pack)

    #76221-2
    $24.99
    ( 267 In stock)

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness: 6.35mm
    • Hole Diameter: 14mm
    • Number of teeth: 64
    • Step File 

     

    6mm ID Pulley x 10 Tooth (2 pack)

    #76232-2
    $12.99
    ( 389 In stock)

    Used with the Maverick DC Motor with a 6mm shaft and any 6mm D-Shaft Axels. Used with 10mm Timing Belt, # 76233.

    Specifications:

    • 10 Tooth Timing Pulley
    • 6mm Bore 
    • material: 6061 T6 Aluminum
    • Step File

     

    6mm Servo Hub 25T

    #76149
    $5.99
    ( 50 In stock)

    The 6mm Servo Hub 25T is made of anodized 6061-T6 Aluminum and is used to connect a servo motor to a D-Shaft axel.

    6mm Shaft Hub (4 pack)

    #76284-4
    $9.99
    ( 714 In stock)

    The 6mm Shaft hub is used to connect any Studica wheel and the Studica motor or any motor with a 6mm shaft.

    Specifcation:

    • Material: 6061-T6 Aluminum
    • 6mm ID
    • Hole pattern for connecting to structure
    • Step File 

    6mm x 35mm D-Shaft (6 pack)

    #76159-6
    $8.35
    ( 882 In stock)

    The 6mm diameter D -Shaft is made of stainless steel and is used throughout our building system as drive components. The D-Shaft profile is used with pulleys, gears and hubs when tightening the set screws and creating a non-slip connection.

    80 Tooth GT2-6mm Timing Belt Pulley

    #76454
    $12.99
    ( 936 In stock)

    The 80 Tooth GT2-6mm Timing Belt Pulley can be used with any of the GT2 belts. 

    Specifications:

    • 80 Tooth Timing Pulley
    • 6mm Bore 
    • Material: 6061 T6 Aluminum
    • Step File

    Bronze Bushing 6mm ID x 14mm OD (12 pack)

    #76301-12
    $22.99
    ( 1183 In stock)

    The Bronze Bushing 6mm ID x 14mm OD fits any of the channel and flat brackets having the common center hole pattern of 14mm. The inside diameter will fit any of the D-Shaft axels.

    • Material:  bronze
    • Inside Diameter: 6 mm
    • Outside Diameter: 14 mm
    • Step File

     

     

    Bronze Bushing 6mm ID x 8mm OD (12 pack)

    #76300-12
    $6.99
    ( 1448 In stock)

    The D-Shaft Collar is 6mm ID and 12mm OD. The inside diameter will fit any of the D-Shaft axels.

    Specifcations:

     

    Flange Bearing 6mm ID x 14mm OD x 15mm Flange (12 pack)

    #76302-12
    $17.99
    ( 1062 In stock)

    The Flange Bearing 14mm OD fits any of the channel and flat brackets with the common hole pattern having a center hole of 14mm. The inside diameter will fit any of the D-Shaft axels.

    • Quantity: 12
    • Material: AISI440C stainless steel
    • Sealed Type: ZZ metal shields
    • Precision: ABEC-3
    • Clearance: C0
    • Lubrication:Kyodo SRL Grease
    • ID (inner diameter)/Bore:6 mm
    • OD (outer diameter): 14 mm
    • OD of Flanged Size: 15 mm
    • Width: 5 mm
    • Thickness of Flange: 1 mm
    • Step File

     

    GT2 Timing Belt, 2mm Pitch, 6mm width, 1000mm Open, (2 pack)

    #76464-2
    $9.99
    ( 1275 In stock)

    This GT2 (also called 2GT) timing belt has a 2mm Pitch, 6mm width, and open 1000mm in length. Use any of the GT2 pulleys from Studica and the clamp kit.

    Specifications:

    • type: GT2 open-loop
    • pitch: 2 mm
    • width: 6 mm
    • material: neoprene rubber, fiberglass reinforced
    • belt shape: circular tooth profile

    GT2 Timing Belt, 2mm Pitch, 6mm width, 108mm Closed, (2 pack)

    #76457-2
    $3.99
    ( 321 In stock)

    This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width

    Specifications:

    • type: GT2 closed-loop 108mm 
    • pitch: 2 mm
    • width: 6 mm
    • material: neoprene rubber, fiberglass reinforced
    • belt shape: circular tooth profile

    GT2 Timing Belt, 2mm Pitch, 6mm width, 140mm Closed, (2 pack)

    #76458-2
    $4.99
    ( 321 In stock)

    This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width

    Specifications:

    • type: GT2 closed-loop 140mm 
    • pitch: 2 mm
    • width: 6 mm
    • material: neoprene rubber, fiberglass reinforced
    • belt shape: circular tooth profile

    GT2 Timing Belt, 2mm Pitch, 6mm width, 160mm Closed, (2 pack)

    #76465-2
    $2.99 $5.49
    ( 182 In stock)

    This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width

    Specifications:

    • type: GT2 closed-loop 160mm 
    • pitch: 2 mm
    • width: 6 mm
    • material: neoprene rubber, fiberglass reinforced
    • belt shape: circular tooth profile

    GT2 Timing Belt, 2mm Pitch, 6mm width, 190mm Closed, (2 pack)

    #76459-2
    $5.99
    ( 318 In stock)

    This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width

    Specifications:

    • type: GT2 closed-loop 190mm 
    • pitch: 2 mm
    • width: 6 mm
    • material: neoprene rubber, fiberglass reinforced
    • belt shape: circular tooth profile

    GT2 Timing Belt, 2mm Pitch, 6mm width, 240mm Closed, (2 pack)

    #76460-2
    $6.99
    ( 314 In stock)

    This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width

    Specifications:

    • type: GT2 closed-loop 240mm 
    • pitch: 2 mm
    • width: 6 mm
    • material: neoprene rubber, fiberglass reinforced
    • belt shape: circular tooth profile

    GT2 Timing Belt, 2mm Pitch, 6mm width, 330mm Closed, (2 pack)

    #76461-2
    $7.99
    ( 300 In stock)

    This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width

    Specifications:

    • type: GT2 closed-loop 330mm 
    • pitch: 2 mm
    • width: 6 mm
    • material: neoprene rubber, fiberglass reinforced
    • belt shape: circular tooth profile

    GT2 Timing Belt, 2mm Pitch, 6mm width, 630mm Closed, (2 pack)

    #76462-2
    $8.99
    ( 317 In stock)

    This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width

    Specifications:

    • type: GT2 closed-loop 630mm 
    • pitch: 2 mm
    • width: 6 mm
    • material: neoprene rubber, fiberglass reinforced
    • belt shape: circular tooth profile

    GT2 Timing Belt, 2mm Pitch, 6mm width, 810mm Closed, (2 pack)

    #76463-2
    $9.99
    ( 318 In stock)

    This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width

    Specifications:

    • type: GT2 closed-loop 810mm 
    • pitch: 2 mm
    • width: 6 mm
    • material: neoprene rubber, fiberglass reinforced
    • belt shape: circular tooth profile

    GT2-6mm Smooth Idler Pulley, H Type, w/3mm Inner Bore Bearing

    #76455
    $6.99
    ( 1627 In stock)

    GT2-6mm Smooth Idler Pulley, H Type, w/3mm Inner Bore Bearing

    GT2-6mm Timing Belt Clamp w/Set Screw

    #76456
    $4.99
    ( 709 In stock)

    The GT2-6mm Timing Belt Clamp w/Set Screw is used with all the GT2 belts

    Specifications:

    Maverick 12V DC Gear Motor w/Encoder

    #75001
    $28.99
    ( 774 In stock)

    The Maverick 12V DC Gear Motor 61:1 w/Encoder was designed for strength and endurance.
     

    Specifications:

    • Voltage:                        12V DC
    • Length:                         134mm
    • Gear Ratios:                 61:1
    • Shaft Diameter:            6mm D-Shaft
    • Diameter:                     37mm
    • Stall Torque:                 50.5 kg-cm (702 oz-in)
    • RPM:                             100
    • Encoder:                       Hall effect/Quadrature, 6CPR, 1,440 pulse per revolution
    • Weight:                          326 grams
    • Power cable:                 PP45, 45cm, 14AWG
    • Encoder Cable:             45cm, 22AWG 4-pin
    • Step File

    Multi-Mode Smart Servo

    #75002
    $23.99
    ( 2188 In stock)

    The Studica Multi-Mode Smart Servo features all-steel gears and large amounts of torque. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.  
     

    Specifications:

    • Type:                             Metal Brush Motor
    • Horn Gear Spline:       25T (5.9mm)
    • Size:                               40mm x 20.1mm x 38.3mm
    • Weight:                          65g
    • Maximum Speed:        62RPM at 6V
    • Stall Torque:                 20kg.cm at 6V
    • Voltage:                         6-7 4V
    • Cable:                             22AWG, 75cm
    • Step File

    Multi-Mode Smart Servo 200 - FAST

    #75007
    $24.99
    ( 1336 In stock)

    The Multi-Mode Smart Servo 200 rotates at 200RPM. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.  

    Shaft Coupling 6mm ID x 12mm OD (2 pack)

    #76303-2
    $3.99
    ( 774 In stock)

    Can be used with 6mm D-Shaft Axel and 6mm shaft DC motor. 

    Specifcations:

    • Material: 6061-T6 Aluminum
    • Inside Diameter: 6mm
    • Outside Diameter: 12mm
    • Step File

    Shock Absorber - 1/10 Aluminum - 100mm (2 pack)

    #76351-2
    $15.99
    ( 168 In stock)

    Specifications:

    Shock Absorber - 1/10 Aluminum - 55mm (2 pack)

    #76350-2
    $15.99
    ( 233 In stock)

    Specifications:

    Slide Rail, 288mm Length, 180mm Stroke

    #72066
    $14.99
    (In stock)

    The Studica Slide Rail is made of light weight aluminum, is 24mm wide, and is perfect for building a multi-stage slide system. Closed length is 288m, with a 180mm stroke, creating a 468mm extended length. 

     

    Specifications:

    • Width: 24mm
    • Height: 7.2mm
    • Length: 288mm
    • Stroke: 180mm
    • Extendended length: 468mm
    • Material: 6061 Aluminum
    • Step files

    Wheel Pack

    #70255
    $299.00
    ( 0 In stock)

    Includes,

    • 4 - 100mm Drive Wheel, 50A, 12.5mm wide, 1/2" Inner Hex, Blue  76261
    • 4 - 100mm Drive Wheel, 50A, 25mm wide, 1/2" Inner Hex, Blue  76262
    • 4 - 50mm Drive Wheel, 50A, 25mm wide, 1/2" Inner Hex, Blue  76269
    • 4 - Omni Wheel (100mm, Double Plastic, w/ integrated 6mm Hub)  76260
    • 2 - 6mm x 96mm D-Shaft (6 pack)  76161-6
    • 1 - 6mm x 432mm D-Shaft (2 pack)  76162-2
    • 1 - Bushing Bronze 6mm ID x 8mm OD (12 Pack)  76300-12
    • 1 - Bushing Bronze 6mm ID x 14mm OD (12 Pack)  76301-12
    • 1 - Flange Bearing  6mm ID, 14mm OD, 15mm Flange (12 Pack)  76302-12
    • 3 - 6mm Shaft Hub (4 pack)  76284-4
    • 2 - Collar 6mm ID D-Shaft, 12mm OD (6 pack)  76304-6
    • 1 - Shaft Spacer Plastic 6mm ID x 10mm OD x 1mm L (24 pack)  76305-24