Close
All Categories
    Filters
    Preferences
    Search

    SR-Pro Camera

    $179.99

    The Studica SR-Pro 8mp Camera with CSI to HDMI Adopter board was designed for the VMX-Titan Robotics Platform for WorldSkills, and Raspberry Pi hardware. 

    Features and Specifications:

    • Camera:
      • Optical Size - 1/4’’
      • Resolution - 8mp
      • Frame Rate - 1080p30, 720p60 and 640 × 480p60/90
      • Field of View (FOV) - 75 degrees (Horizontal)
      • Lens Mount - M12
      • IR Sensitivity - Visible Light Only
      • Step File
         
    • CSI-HDMI Adapter Board:
      • Supports Raspberry Pi 4B, Pi 3B+, Pi 3B, Pi 2, Model A/B/B+
      • Support Raspberry Pi 5MP OV5647/8MP IMX219/12MP IMX477 camera
      • HDMI - High Speed - 1M length
      • Reserved microphone and headphone jack for audio or GPIO signals
      • Three additional solder pads are available (same signals as headphone jack
    MFR Part #: 71045
    Availability: In stock
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    • Bad
    • Excellent
    Customers who bought this item also bought

    Maverick 12V DC Gear Motor w/Encoder

    75001
    #75001
    $28.99

    The Maverick 12V DC Gear Motor 60:1 w/Encoder was designed for strength and endurance.

    Specifications:

    • Voltage:                        12V DC
    • Length:                         134mm
    • Gear Ratios:                 60:1
    • Shaft Diameter:              6mm D-Shaft
    • Diameter:                     37mm
    • Stall Torque:                 50.5 kg-cm (702 oz-in)
    • RPM:                            100
    • Encoder:                        Hall effect/Quadrature, 6CPR, 1,440 pulse per revolution
    • Weight:                          326 grams
    • Power cable:                 PP45, 45cm, 14AWG
    • Encoder Cable:             45cm, 22AWG 4-pin
    • Step File

    Shanghai Gurney

    75102
    #75102
    $89.99

    The Shanghai Gurney includes the following items,

    1 192mm x 96mm Flat Bracket 76066
    2 L Bracket (2 pack) 76087-2
    2 6mm x 140mm D-Shaft 76164
    4 Bronze Bushing 6mm ID x 14mm OD 76301
    4 75mm Drive Wheel - 60A, 12.5mm wide, 1/2" Inner Hex, Black 76271
    1 Shaft Spacer Plastic 6mm ID x 10mm OD x 1mm L (4) 76305
    1 6mm Shaft Hub (4 pack) 76284-4
    1 M3 Kep Nut (pack of 100) 76204-100
    1 M3 x 10mm Socket Head Cap Screw (pack of 100) 76201-100

     

    Shanghai Challenge Elements - 15 pack

    75101
    #75101
    $49.99

    5 Blue, 5 White, and 5 Yellow

    Multi-Mode Smart Servo

    75002
    #75002
    $23.99

    The Studica Multi-Mode Smart Servo features all-steel gears and large amounts of torque. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.  

    Specifications:

    Type:                             Metal Brush Motor
    Horn Gear Spline:       25T (5.9mm)
    Size:                               40mm x 20.1mm x 38.3mm
    Weight:                          65g
    Maximum Speed:        62RPM at 6V
    Stall Torque:                 20kg.cm at 6V
    Voltage:                         6-7 4V
    Cable:                             22AWG, 75cm

    Cobra Line Follower Sensor

    70151
    #70151
    $9.99

    The Cobra Line Follower Array provides 4 X QRE1113 IR reflectance sensor mounted on a 9mm pitch Each sensor is comprised of two parts - an IR emitting LED and an IR sensitive phototransistor. When you apply power to the VCC and GND pins the IR LED inside the sensor will illuminate.

    The Studica Line Sensor Board consists of 4 IR LED/phototransistor pairs, making it a great detector for a line-following robot.  The Line Sensor Board allows the robot to tell objects or surfaces apart based on how dark or light they are. It shines a beam of infrared light out onto the object, and measures how much light is reflected back.

    Each sensor provides a separate analog voltage output. The sensor board is an infrared emitter/receiver that is able to differentiate between a dark surface (with low IR reflectivity – 3.3V to 5V) and a light surface (with high IR reflectivity – 0V to 0.5V). However, this range can vary depended on the installed height of the sensor board. 

    The optimum height distance is 3-5 mm; however, the reflectivity values will change depending on distance. A daylight filter is built into the sensor.

    • 5VDC operating voltage (recommended)
    • 70mA supply current
    • Optimal sensing distance: 0.125" (3mm)
    • Step File

    120 Degree Bracket (2 pack)

    NNH-76080-2
    #76080-2
    $12.99

    The 120 Degree Bracket is perfect for connecting two channel pieces at 120 degrees from each other. Each side is 48mm wide to fit perfectly on the channel. Use three brackets with 3 channel pieces to make 3 wheeled robots. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File

     

    M3 Kep Nut (100 pack)

    76204-100
    #76204-100
    $9.99