Close
All Categories
    Filters
    Preferences
    Search

    WorldSkills Mobile Robotics Collection Junior 2021

    Request a Quote

    The WorldSkills Mobile Robotics 2021 Junior Collection by Studica is the authorized collection for the WorldSkills Mobile Robotics Junior Competition. This comprehensive Collection includes over 1,400 items including controller, electronics, motors, structure, gears, sprockets, pulleys, belts, axles, slides, rack & pinion, wheels, bushings, bearings, coupling, collars, spacers, screws, nuts, and standoffs. 

    Download brochure and BOM

    MFR Part #: 70301
    Availability: In stock

    Structure:

    • Channel:
      • Two types are available: U Series Channel and Low Profile Series Channel
      • Enhanced Pattern allows for easy connecting of structure, gears, sprockets, and motors
      • Larger Centre Hole to allow for bearings and for rotating components to pass-through
      • All mounting holes fit new metric M3 Hardware.
    • Flat Beams: Beams are on the compact side of the structural elements with a simple to use 8mm linear pattern. They are also easy to bend for customization.
    • Flats: The plates have the Studica pattern down the length of the plate. Use them to add support, as a bracket to attach something to, or as a trim panel to get just the right look for your build.
    • Brackets: New brackets with faces on more than one plane.  Many of the brackets allow you to build off from your main structure at an angle.  Others have a more specialized common uses such as to hold a trailing wheel or drive-wheel for a mobile chassis.
    • Mounts: These are cornerstone pieces to the major framework of your project. Mounts allow you to create solid junctions, add support, and open up mounting possibilities.
      • Motor Mount Plate
      • Updated Servo Mounts
      • Updated Motor Mounts
    • Gears, Chains, and Sprockets: Updated straight-cut spur gears have a 14 mm bore with the Studica pattern in order to mount to hubs and other rotating components. New bevel gears for gearbox design and enhanced drive system design.

    Motion:

    • Motors:
      • DC Gear Motor: The Maverick Series Planetary Gear Motors offer efficient and robust power for the robot. M3 mounting holes on the Studica pattern offer a new and quick and convenient way to integrate with other components. The 6mm D-shaft, 61:1 Gearbox, and 470mm long power wires combined with the Powerpole connectors offer a high quality, high current connection in a compact motor.
      • Servo Motor : The Studica Robotics servo is updated with new features including an ultra stout steel gear train, more torque and a new top case This angular programmable Servo can fill a variety of roles on your robot or project. In the default mode, the servo can rotate 300 degrees while having positioning feedback. In this mode, the PWM signal will determine the position of the servo. Using the Servo Programmer the servo can be toggled into continuous rotation mode. In this mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.
    • Wheels:
      • Omni Wheels: Our new Dual Omni wheels are single piece with enhanced have rubber rollers around the perimeter, perpendicular to the drive-direction so your robot chassis can move laterally with ease. Each steel sleeved roller rides on a polished steel axle in order to minimize friction. This new design means that as the wheels rotate the load is transferred seamlessly from one roller to the next.

    Electronics and Control System:

    • VMX: The powerful robot controller:
      Supports Java and C++, future support for ROS
      • The VMX integrates the navX-Sensor and via the Linux based controller, it has much more memory, processing power, Gigabit Ethernet, USB3 ports and built-in Wifi/Bluetooth.
      • Supports Open CV, Tensor Flow, SLAM (Simultaneous Localization and Mapping )
    • The Studica VMX leverages five recent key technology developments:
      • Highly-integrated, inexpensive, WiFi-enabled, multi-core Linux computing platform with lots of USB IO for expansion
      • 32-bit ARM Microcontrollers incorporating sophisticated I/O and digital communications engines
      • Low-cost MEMs Inertial Measurement Units (IMUs)
      • Powerful software providing rich libraries and tools for developing robot software in C++, Java
      • CAN bus for high-speed, real-time communication between devices
    • Titan:
      A powerful, 4-channel CAN-based motor controller with built-in fuse-box (for DC motors up to 20A)
      • 4 x Hardware encoder ports – one for each motor
      • 2 limit switch ports for each motor
      • Fuse box to set manual current limits
      • 2x Power extension ports to power other 12VDC devices. I.E.
        • VMX
        • Servo Power Module
      • Built in LED Controller
      • 6A power supply for LED's
      • i2c communication port to control LED Controller
      • USB ports are updated to USB-C to better support todays cable standards
    • Servo Power Block:
      • Power up to 8 Servo Motors

    Programming Tools:

    • Supported:
      • Visual Studio Code is the supported development editor for C++ and Java, these are the supported languages used for programming a 2021 robot. Visual Studio Code is a free source-code editor made by Microsoft for Windows, Linux and macOS. Features include support for debugging, syntax highlighting, intelligent code completion, snippets, code refactoring, and embedded
      • Free license use of the WPI Robotics library (WPILib) - a set of classes that interface to the hardware, the control system and your robot. 
      • Libraries and Tools for developing lower-level Raspberry Pi-based robot applications.
    • Non Supported but available:
      • LabVIEW
      • Python 
      • The VMX- ROS Node is currently under development

    Optional Accessories:

    • Mecanum Wheels:
      • The Standard Studica mecanum wheels are packed full of conveniences you won’t find in other brands.  The blue anodized aluminum side plates sandwich a beefy plastic wheel-center. The wheel-center has an interchangeable hub, his makes it easy to mount to a standard shaft  or other component of your choice.   This set contains two Left Slant Mecanum Wheels and two Right Slant Mecanum Wheels. 
      • An enhanced option is available where wheel has rollers which are supported by ball-bearings so that they rotate with ease.
    • Aluminum Extrusion
    • Motion Assemblies
    • All Terrain Tires
    • Tools
    Existing reviews
    1
    1
    From: John | Date: 2021-04-14 10:45 PM
    Was this review helpful? Yes No (0/0)
    1
    1
    From: John | Date: 2021-04-14 10:46 PM
    Was this review helpful? Yes No (1/0)
    1
    1
    From: John | Date: 2021-04-14 10:46 PM
    Was this review helpful? Yes No (0/0)
    1
    1
    From: John | Date: 2021-04-14 10:46 PM
    Was this review helpful? Yes No (0/0)
    Write your own review
    • Only registered users can write reviews
    • Bad
    • Excellent

    Structure:

    • Channel:
      • Two types are available: U Series Channel and Low Profile Series Channel
      • Enhanced Pattern allows for easy connecting of structure, gears, sprockets, and motors
      • Larger Centre Hole to allow for bearings and for rotating components to pass-through
      • All mounting holes fit new metric M3 Hardware.
    • Flat Beams: Beams are on the compact side of the structural elements with a simple to use 8mm linear pattern. They are also easy to bend for customization.
    • Flats: The plates have the Studica pattern down the length of the plate. Use them to add support, as a bracket to attach something to, or as a trim panel to get just the right look for your build.
    • Brackets: New brackets with faces on more than one plane.  Many of the brackets allow you to build off from your main structure at an angle.  Others have a more specialized common uses such as to hold a trailing wheel or drive-wheel for a mobile chassis.
    • Mounts: These are cornerstone pieces to the major framework of your project. Mounts allow you to create solid junctions, add support, and open up mounting possibilities.
      • Motor Mount Plate
      • Updated Servo Mounts
      • Updated Motor Mounts
    • Gears, Chains, and Sprockets: Updated straight-cut spur gears have a 14 mm bore with the Studica pattern in order to mount to hubs and other rotating components. New bevel gears for gearbox design and enhanced drive system design.

    Motion:

    • Motors:
      • DC Gear Motor: The Maverick Series Planetary Gear Motors offer efficient and robust power for the robot. M3 mounting holes on the Studica pattern offer a new and quick and convenient way to integrate with other components. The 6mm D-shaft, 61:1 Gearbox, and 470mm long power wires combined with the Powerpole connectors offer a high quality, high current connection in a compact motor.
      • Servo Motor : The Studica Robotics servo is updated with new features including an ultra stout steel gear train, more torque and a new top case This angular programmable Servo can fill a variety of roles on your robot or project. In the default mode, the servo can rotate 300 degrees while having positioning feedback. In this mode, the PWM signal will determine the position of the servo. Using the Servo Programmer the servo can be toggled into continuous rotation mode. In this mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.
    • Wheels:
      • Omni Wheels: Our new Dual Omni wheels are single piece with enhanced have rubber rollers around the perimeter, perpendicular to the drive-direction so your robot chassis can move laterally with ease. Each steel sleeved roller rides on a polished steel axle in order to minimize friction. This new design means that as the wheels rotate the load is transferred seamlessly from one roller to the next.

    Electronics and Control System:

    • VMX: The powerful robot controller:
      Supports Java and C++, future support for ROS
      • The VMX integrates the navX-Sensor and via the Linux based controller, it has much more memory, processing power, Gigabit Ethernet, USB3 ports and built-in Wifi/Bluetooth.
      • Supports Open CV, Tensor Flow, SLAM (Simultaneous Localization and Mapping )
    • The Studica VMX leverages five recent key technology developments:
      • Highly-integrated, inexpensive, WiFi-enabled, multi-core Linux computing platform with lots of USB IO for expansion
      • 32-bit ARM Microcontrollers incorporating sophisticated I/O and digital communications engines
      • Low-cost MEMs Inertial Measurement Units (IMUs)
      • Powerful software providing rich libraries and tools for developing robot software in C++, Java
      • CAN bus for high-speed, real-time communication between devices
    • Titan:
      A powerful, 4-channel CAN-based motor controller with built-in fuse-box (for DC motors up to 20A)
      • 4 x Hardware encoder ports – one for each motor
      • 2 limit switch ports for each motor
      • Fuse box to set manual current limits
      • 2x Power extension ports to power other 12VDC devices. I.E.
        • VMX
        • Servo Power Module
      • Built in LED Controller
      • 6A power supply for LED's
      • i2c communication port to control LED Controller
      • USB ports are updated to USB-C to better support todays cable standards
    • Servo Power Block:
      • Power up to 8 Servo Motors

    Programming Tools:

    • Supported:
      • Visual Studio Code is the supported development editor for C++ and Java, these are the supported languages used for programming a 2021 robot. Visual Studio Code is a free source-code editor made by Microsoft for Windows, Linux and macOS. Features include support for debugging, syntax highlighting, intelligent code completion, snippets, code refactoring, and embedded
      • Free license use of the WPI Robotics library (WPILib) - a set of classes that interface to the hardware, the control system and your robot. 
      • Libraries and Tools for developing lower-level Raspberry Pi-based robot applications.
    • Non Supported but available:
      • LabVIEW
      • Python 
      • The VMX- ROS Node is currently under development

    Optional Accessories:

    • Mecanum Wheels:
      • The Standard Studica mecanum wheels are packed full of conveniences you won’t find in other brands.  The blue anodized aluminum side plates sandwich a beefy plastic wheel-center. The wheel-center has an interchangeable hub, his makes it easy to mount to a standard shaft  or other component of your choice.   This set contains two Left Slant Mecanum Wheels and two Right Slant Mecanum Wheels. 
      • An enhanced option is available where wheel has rollers which are supported by ball-bearings so that they rotate with ease.
    • Aluminum Extrusion
    • Motion Assemblies
    • All Terrain Tires
    • Tools
    Customers who bought this item also bought

    Shanghai Challenge Elements - 15 pack

    75101
    #75101
    $39.99

    5 Blue, 5 White, and 5 Yellow

    Shanghai Gurney

    75102
    #75102
    $89.99

    The Shanghai Gurney includes the following items,

    1 192mm x 96mm Flat Bracket 76066
    2 L Bracket (2 pack) 76087-2
    2 6mm x 140mm D-Shaft 76164
    4 Bronze Bushing 6mm ID x 14mm OD 76301
    4 75mm Drive Wheel - 60A, 12.5mm wide, 1/2" Inner Hex, Black 76271
    1 Shaft Spacer Plastic 6mm ID x 10mm OD x 1mm L (4) 76305
    1 6mm Shaft Hub (4 pack) 76284-4
    1 M3 Kep Nut (pack of 100) 76204-100
    1 M3 x 10mm Socket Head Cap Screw (pack of 100) 76201-100

     

    WorldSkills Mobile Robotics Collection Shanghai 2022

    70201
    #70201
    Request a Quote

    The WorldSkills Mobile Robotics Collection – Shanghai 2022 by Studica is the authorized collection for the WorldSkills Mobile Robotics Competition. Featuring the Studica VMX Robotics Controller for WorldSkills, the Titan Quad Motor Controller and Servo Power Block. This comprehensive Collection also includes electronics, accessories, motors, servos, mounts, U-Channel, mounting plates, flat brackets, irregular brackets, and flat beams. You'll also find gears, sprockets, pulleys, belts, axles, slides, rack & pinion, wheels, bushings, bearings, coupling, collars, spacers, screws, nuts, and standoffs. Includes Everything You Need (Over 1500 components).

    Download brochure and BOM

    VMX FRC Training Bot

    8902306
    #74000
    $1299.00

    The Studica VMX FRC-compatible Training Bot (FRC Trainer) is a smaller, sturdy, lightweight, and less expensive robot than your typical FRC robot. If you have a large FRC team, often only a handful of students get to learn how to create and program your team’s costly competition robot.  The FRC Trainer solves this problem and is ideal for groups of two to three to participate in hands-on learning in a classroom environment.  Schools can equip their labs with multiple FRC Trainers, benefiting from the great value and compact size. Students can even take it home with them! 

    This affordable solution is intended for:

    • FRC teams that want to learn and train on a smaller and more affordable robot,
    • Schools looking for a way to teach FRC robotics in the classroom.
    • Schools that want to teach coding in the classroom through robotics.

    The FRC-compatible Trainer is an intelligent and autonomous robot that uses the VMX Advanced Robotics Controller which can be programmed in C++ and Java.  VMX’s multitude of modern digital communications interfaces and Linux-based operating system allow users to directly access most modern devices (e.g., Intel RealSense tracking and depth cameras and LIDAR).


    VMX-Pi Key Use Cases and Hardware/Software Features and Benefits
    VMI-Pi Key Use Case Document is available here

    Shanghai Accessory Kit

    75103
    #75103
    $499.00

    The Shanghai Accessory Kit includes the following items. Many of the parts are already included in the Shanghai Collection, however some, highlighted in blue text, are not. 

    Qty Product Part #
    1 Mecanum Wheel Set (2 left, 2 right, 100mm, w/6mm Hub)  76240
    2 Rack & Pinion Set (1 Rack, 1 Pinion, 2 Glides) 76170
    1 Linear Slide Kit, 250mm Slide and Block 72064
    2 432mm U-Channel 76010
    2 192mm U-Channel 76015
    4 30 Tooth Bevel Gear 1 to 1 (2 Pack) 76219-2
    1 Flange Bearing 6mm ID, 14mm OD, 15mm Flange (12 pack) 76302-12
    1 Collar 6mm ID D-Shaft, 12mm OD (6 pack) 76304-6
    1 Shaft Spacer Plastic 6mm ID x 10mm OD x 1mm L (24 pack) 76305-24
    1 Shaft Spacer Plastic 6mm ID x 10mm OD x 5mm L (12 pack) 76307-12
    1 M3 x 12mm Socket Head Cap Screw (pack of 100) 76202-100
    1 M3 x 10mm Button Head Cap Screw (pack of 50) 76203-50
    1 M3 Kep Nut (pack of 100) 76204-100
    1 48mm Standoff (12 pack) 76181-12
    2 Servo Mount Flat Plate 76145
    2 Servo Mount Offset Plate 76146
    2 Servo Horn 25T 76148
    2 6mm D-Shaft Servo Hub 25T 76149
    1 96mm Adjustable Flat Bracket (2 pack) 76083-2
    1 L Bracket (2 pack) 76087-2
    1 Inside L Bracket (2 pack) 76089-2
    1 144mm x 40mm Flat Bracket (2 pack) 76064-2
    1 96mm Flat Beam (2 pack) 76047-2
    2 96mm Square Beam 76107
    2 Multi-Mode Smart Servo 75002
    1 IR Range Sensor (10 cm to 80 cm) 40117
    1 IR Range Sensor Bracket 40118

    VMX/Titan Plus Upgrade Kit

    74003
    #74003
    $899.00

    This kit may be used with older structure and most sensors.  It includes everything required to connect to the collection and sensors. The only other electronic item required may be the SR-Pro Camera.

    Includes,

    Recycle Material Blue Ball

    75067
    #75067
    $0.79