Close
All Categories
    Filters
    Preferences
    Search

    Powerpole Crimp Tool 15/30/45

    $37.99

    ThePowerpole Crimp Tool 15, 30, 45 crimping tool provides a positive crimp on the 15, 30 & 45 amp contacts manufactured by Anderson Power Products for the Powerpole® line of products. It has the following features.

    Specifications:

    • Crimps all three sizes of Powerpole┬« contacts; 15, 30 and 45 amp
    • Built-in contact positioner that holds the contact during crimping
    • Ratchet mechanism assures proper crimps every time
    • Far faster and better than soldering
    • Provides the highest strength and the lowest resistance connections possible
    • Dimensions: 7.75" X 3" X 1.5"
    • Weight: 20 ounces
    • High Contact retention force

    Contacts & Jaw Position

    The 3 contacts have different amp ratings:

    • 15 Amp (SKU: 1332) is designed to receive 16, 18 and 20 gauge wire.
    • 30 Amp (SKU: 1331) is designed to receive 12, 14 gauge wire.
    • 45 Amp (SKU: 261G2) is designed to receive 10 gauge wire.

    The contact size corresponds to the position marking on the die. The 15 amp contact goes into the 15 amp position, the 30 amp into the 30 position, and 45 amp into the 45 position.

    Assembly Instructions 15 & 30 Amp

    To crimp the 15 & 30 amp contacts it is recommended that you insert the wire into the contact prior to inserting them into the tool. Then, with the flat side of the contact down, insert the contact tip into the proper slot for crimping.

    Squeeze the ratchet handle until the ratchet mechanism releases. Do not over crimp by squeezing the handles together until they touch, it is possible to break the die.

    Assembly Instructions 45 Amp

    To crimp the 45 amp contact it is recommended that you position the tip of the 45 amp contact into the 45 amp position slot before the wire is inserted. Make sure the contact is properly positioned with the U (open contact) facing up. If the contact is lying sideways you may not obtain a proper crimp. Then, insert your wire into the inserted contact.

    Squeeze the ratchet handle until the ratchet mechanism releases. Do not over crimp by squeezing the handles together until they touch, it is possible to break the die.


    Read more: http://www.powerwerx.com/crimping-tools/tricrimp-crimping-powerpole-contacts.html#ixzz2YlrFRGU8

    Note: Only official tooling solutions recommended by APP may be acceptable for safety agency approvals such as UL, CSA and TUV. Official tooling solutions such as the 1309 series are available for purchase at a higher price. Read more: http://www.powerwerx.com/crimping-tools/tricrimp-crimping-powerpole-contacts.html#ixzz44INkWK9m

    MFR Part #: 70143
    Availability: In stock
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    • Bad
    • Excellent
    Customers who bought this item also bought

    Shanghai Gurney

    75102
    #75102
    $89.99

    The Shanghai Gurney includes the following items,

    1 192mm x 96mm Flat Bracket 76066
    2 L Bracket (2 pack) 76087-2
    2 6mm x 140mm D-Shaft 76164
    4 Bronze Bushing 6mm ID x 14mm OD 76301
    4 75mm Drive Wheel - 60A, 12.5mm wide, 1/2" Inner Hex, Black 76271
    1 Shaft Spacer Plastic 6mm ID x 10mm OD x 1mm L (4) 76305
    1 6mm Shaft Hub (4 pack) 76284-4
    1 M3 Kep Nut (pack of 100) 76204-100
    1 M3 x 10mm Socket Head Cap Screw (pack of 100) 76201-100

     

    Chain Break & Press Tool

    76231
    #76231
    $29.99

    The easy way to change the length of your #25 chain. (Chain not included)

    - See Instructions for use

    Powerpole 45 Extension Cable - 14AWG - 50cm

    70021
    #70021
    $9.99

    The Powerpole Extension Cable is 50cm long and 14AWG wire gauge to handle heavier loads.

    Inside U Bracket (2 pack)

    76086-2
    #76086-2
    $5.99

    Made from 3mm thick heavy 6061-T6 Aluminum, the Inside U Bracket is 42mm x 45mm and is used inside the U Channel or Low profile channel.. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File

     

    Shanghai Wall Board Instruction Set (20 pack)

    75105
    #75105
    $4.99

    The Shanghai Wall Board Instruction Set are flat magnets, like refrigerator magnets, that will adhere to the Shanghai Work Order Board. The set includes 20 pieces in total.

    Specifications:

    • Made of Magnets and ABS
    • Includes,
      • 5 blue medicine cube magnets
      • 5 white medicine cube magnets
      • 5 hazardous material cubes magnets
      • 5 gurney picture magnets

    You can use these with the Shanghai Work Order Board, part # 75104

    5.5mm Combination Wrench

    70145
    #70145
    $6.99

    Hex Key Metric 9 Piece Set (1.5mm to 10mm)

    70144
    #70144
    $9.99