Close
All Categories
    Filters
    Preferences
    Search

    Robotics Toolbox

    Has two compartments on the lid for tools and electronics.

    • Material: PP
    • Size: 59*36*32cm (23" x 14" x 12.6")
    • Capacity: 55L
    MFR Part #: 70055
    $79.00
    Availability: 58 in stock
    Write your own review
    • Product can be reviewed only after purchase
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent
    Customers who bought this item also bought

    Maverick 12V DC Gear Motor w/Encoder

    #75001
    $28.99
    ( 163 In stock)

    The Maverick 12V DC Gear Motor 61:1 w/Encoder was designed for strength and endurance. 
     

    Specifications:

    • Voltage:                      12V DC
    • Amperage                   11A(full stall). Nominal operating current is 2.2A, at 12V it's 26.4W
    • Wattage                      132W
    • Length:                        134mm
    • Gear Ratios:                 61:1
    • Shaft Diameter:            6mm D-Shaft
    • Diameter:                     37mm
    • Stall Torque:                 50.5 kg-cm (702 oz-in)
    • RPM:                             100
    • Encoder:                       Hall effect/Quadrature, 6CPR, 1,440 pulse per revolution
    • Weight:                          326 grams
    • Power cable:                 PP45, 45cm, 14AWG
    • Encoder Cable:             45cm, 22AWG 4-pin
    • Step File

    nominal so operating current is 2.2A so at 12V this would 26.4W

    End Piece Plate (2 pack)

    #76143-2
    $9.99
    ( 235 In stock)

    The Studica End Piece Plate is commonly fastened to the inside end of the U Channel. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    Material: 6061-T6 Aluminum

     

     

    Cobra Line Follower Sensor

    #70151
    $9.99
    ( 945 In stock)

    The Cobra Line Follower Array provides 4 X QRE1113 IR reflectance sensor mounted on a 9mm pitch Each sensor is comprised of two parts - an IR emitting LED and an IR sensitive phototransistor. When you apply power to the VCC and GND pins the IR LED inside the sensor will illuminate.

    The Studica Line Sensor Board consists of 4 IR LED/phototransistor pairs, making it a great detector for a line-following robot.  The Line Sensor Board allows the robot to tell objects or surfaces apart based on how dark or light they are. It shines a beam of infrared light out onto the object, and measures how much light is reflected back.

    Each sensor provides a separate analog voltage output. The sensor board is an infrared emitter/receiver that is able to differentiate between a dark surface (with low IR reflectivity – 3.3V to 5V) and a light surface (with high IR reflectivity – 0V to 0.5V). However, this range can vary depended on the installed height of the sensor board. 

    The optimum height distance is 3-5 mm; however, the reflectivity values will change depending on distance. A daylight filter is built into the sensor.

    • 5VDC operating voltage (recommended)
    • 70mA supply current
    • Optimal sensing distance: 0.125" (3mm)
    • Step File

    100mm Omni Wheel

    #76260
    $29.99
    ( 15 In stock)

    The 100mm (4 inch)  Double Plastic Omni Wheel provides rotational and sideways 360° maneuverability.  Great for omni directional movement and rotation, easy direction control and tracking, and for fast turning. Use the Enhanced Wheel D-Shat Hub Kit with this Omni Wheel.

     

    Specifications:

    • Diameter:   100mm (4")
    • Axial width:  16mm
    • Number of plates:  2
    • Number of roller: 18
    • Body material:    Nylon
    • Roller material:   Rubber
    • Roller diameter:  19mm
    • Net weight:          275g
    • Load capacity:    20kg
    • Step File

    Inside L Bracket (2 pack)

    #76089-2
    $5.99
    ( 652 In stock)

    Made from 3mm thick heavy 6061-T6 Aluminum, the Inside L Bracket is 42mm x 45mm and is used inside the U Channel or Low profile channel.As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File

     

    L Bracket (2 pack)

    #76087-2
    $5.99
    ( 259 In stock)

    Made from 3mm thick heavy 6061-T6 Aluminum, the L Bracket is 48mm x 48mm and is used outside the U Channel or Low profile channel. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File

     

    Multi-Mode Smart Servo

    #75002
    $23.99
    ( 1807 In stock)

    The Studica Multi-Mode Smart Servo features all-steel gears and large amounts of torque. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.