Close
Menu
All Categories
    (0) Items
    You have no items in your shopping cart.
    (0) Quote
    You have no items in your shopping cart.
    Menu
    Shopping cart
    Filters
    Preferences
    Search
    PrevRubber Grommet (10 pack)
    NextRubber Foot (4 pack)

    U-Channel Bumper (4 pack)

    Be the first to review this product

    The Studica U-Channel Bumper is connected to the end of the Studica 48mm U-Channel and helps remove sharp corners that can cause damage when the robot is bumping into other objects. It also creates an ecstatically clean finish to your robot.

    Specifications:

    • Material: Silicomn/Rubber
    • Hardness: 50-60 Shore A
    • Length: 48mm
    • Width: 48mm
    • Thickness: 10.75mm
    • Color: Black
    • Step File
    MFR Part #: 76505-4
    $6.99
    Availability: In stock

    Write your own review
    • Product can be reviewed only after purchase
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent

    Customers who bought this item also bought

    Rubber Foot (4 pack)

    #76506-4
    $5.49
    (In stock)

    Made of Nylon, the Studica Rubber Foot is used with the Studica Robotics building structure and for many other uses.

    Specifications:

    • Material: Nylon
    • Outside OD: 24mm
    • Inner OD: 21mm
    • Height: 24mm
    • Step File

     

    Servo Arm Extended

    Servo Arm Extended

    #76150
    $5.99
    (In stock)

    The Studica Servo Arm Extended can be used with the Multi Mode Servo, Multi Mode Servo 200, or most servos with a 25 Tooth gear.

     

    Specifcations:

    • Spline: 25 Tooth, 3.8mm deep
    • Length: 56mm
    • Width: 14mm
    • Height: 7.8mm
    • Material: 6061-T6 Aluminum
    • Step File

    Rubber Grommet (10 pack)

    #76504-10
    $5.99
    (In stock)

    Rubber Grommets are made for the Studica channel and plates and or any structure with a 14mm hole. Use it for protecting wire or as a bumper.

    Specifications:

    • Outside diameter: 18mm
    • Inside Diameter : 11mm
    • Hole fitting diameter: 14mm
    • Thickness: 9mm
    • Step File

     

    Enhanced Wheel Hub Kit

    #76291
    $14.99
    ( 2272 In stock)

    Used with Studica Omni and Mecanum wheels for a strong axel hold.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Color: Blue
    • Step File

    Intake Hub Kit

    #70210
    $7.99
    (In stock)

    The Intake Kit can be used to create intake systems and is ideal for the FIRST Technical Challenge (FTC) and World Robotics Olympiad (WRO). Used with the Silicone Rubber Tubing #76410


    Specifications:

    • Main piece
      • hex width: 20.78mm*10.0mm thick
      • 6*M6 tapped holes
      • 1*M4 tappped hole for M4 set screw
      • 6.0mm Diameter D Hole
      • Material AL6061-T6
      • Φ7.5mm*14.0mm
    • Pins
      • 6PCS in a pack
      • M6*4.0mm thread
      • Material SS303
    • Step file
    Picture of 6mm D-Shaft Low Profile Clamping Hub

    6mm D-Shaft Low Profile Clamping Hub

    #76292
    $5.99
    (In stock)
    • Φ29.0mm*16.0mm thick
    • 6*M3 thread tapping through (including 2*M3 thread for M3 SHCS)
    • Φ6.0mm D hole
    • AL6061-T6
    • Step File
    Picture of Silicone Rubber Tubing

    Silicone Rubber Tubing

    #76410
    $3.99

    Used with the Intake Kit to create various intake system with various lengths.

    • ID: 6mm
    • OD: 10mm
    • 1000mm long
    • Wall Thickness: 2mm
    • Flexible
    • Bend Radius: ~30mm
    • Silicone
    • Durometer: 70A
    • Black
    • Step File
    Related products

    Rubber Foot (4 pack)

    #76506-4
    $5.49
    (In stock)

    Made of Nylon, the Studica Rubber Foot is used with the Studica Robotics building structure and for many other uses.

    Specifications:

    • Material: Nylon
    • Outside OD: 24mm
    • Inner OD: 21mm
    • Height: 24mm
    • Step File

     

    Picture of 144mm Low Profile U-Channel

    144mm Low Profile U-Channel

    #76031
    $5.19
    ( 623 In stock)

    The Studica Low Profile U Channel is 3mm thick and has a 48mm x 14mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Height - 14mm
    • Width - 48mm
    • Length - 144mm
    • Hole pattern - 3
    • Step File

     

    Picture of 192mm Low Profile U-Channel

    192mm Low Profile U-Channel

    #76030
    $6.99
    ( 672 In stock)

    The Studica Low Profile U Channel is 3mm thick and has a 48mm x 14mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Height - 14mm
    • Width - 48mm
    • Length - 192mm
    • Hole pattern - 4
    • Step File

     

    Picture of 240mm Low Profile U-Channel

    240mm Low Profile U-Channel

    #76029
    $7.99
    ( 491 In stock)

    The Studica Low Profile U Channel is 3mm thick and has a 48mm x 14mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Height - 14mm
    • Width - 48mm
    • Length - 240mm
    • Hole pattern - 5
    • Step File

     

    Picture of 288mm Low Profile U-Channel (2 pack)

    288mm Low Profile U-Channel (2 pack)

    #76028-2
    $18.59
    ( 814 In stock)

    The Studica Low Profile U Channel is 3mm thick and has a 48mm x 14mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Height - 14mm
    • Width - 48mm
    • Length - 288mm
    • Hole pattern - 6
    • Step File

     

    Picture of 336mm Low Profile U-Channel

    336mm Low Profile U-Channel

    #76027
    $10.29
    ( 877 In stock)

    The Studica Low Profile U Channel is 3mm thick and has a 48mm x 14mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Height - 14mm
    • Width - 48mm
    • Length - 336mm
    • Hole pattern - 7
    • Step File

     

    Picture of 384mm Low Profile U-Channel

    384mm Low Profile U-Channel

    #76026
    $11.99
    ( 525 In stock)

    The Studica Low Profile U Channel is 3mm thick and has a 48mm x 14mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Height - 14mm
    • Width - 48mm
    • Length - 384mm
    • Hole pattern - 8
    • Step File

     

    Picture of 432mm Low Profile U-Channel

    432mm Low Profile U-Channel

    #76025
    $12.99
    ( 632 In stock)

    The Studica Low Profile U Channel is 3mm thick and has a 48mm x 14mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Height - 14mm
    • Width - 48mm
    • Length - 432mm
    • Hole pattern - 9
    • Step File

     

    Picture of 48mm Low Profile U-Channel

    48mm Low Profile U-Channel

    #76033
    $2.49
    ( 542 In stock)

    The Studica Low Profile U Channel is 3mm thick and has a 48mm x 14mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Height - 14mm
    • Width - 48mm
    • Length - 48mm
    • Hole pattern - 1
    • Step File

     

    Picture of 96mm Low Profile U-Channel

    96mm Low Profile U-Channel

    #76032
    $3.99
    ( 619 In stock)

    The Studica Low Profile U Channel is 3mm thick and has a 48mm x 14mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Height - 14mm
    • Width - 48mm
    • Length - 96mm
    • Hole pattern - 2
    • Step File

     

    Information
    Customer service
    My account
    Contact Info
    • Studica Robotics
    • +1 905 564 7272
    Copyright © 2023 Studica Robotics. All rights reserved.