Close
All Categories
    Filters
    Preferences
    Search

    2.5mm Hex Ball End Screwdriver

    This Hex Ball End Screwdriver can be used with most of the M3 screws.

    MFR Part #: 70142
    $5.99
    2001 in stock
    Write your own review
    • Product can be reviewed only after purchase
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent
    Customers who bought this item also bought

    Servo Power Block

    #75006
    $36.99
    ( 2550 In stock)

    The Servo Power Block is a 6V, 60W power injector that provides proper power for RC Servos. It does not interfere with the signal, it will only replace the power to the servo with 6V. 

    Features,

    • Built in DC-DC converter
    • Over-current shutdown
    • ESD protection

    Specifications,

    • Nominal Input Voltage: 12V
    • Operational Voltage Range: 6.0V
    • Number of Channels: 8
    • Max Current for All Channels Combined: 10A
    • Total Continuous Power: 60W
    • Size: 70mm x 45mm x 16mm
    • Step File

     

    Maverick 12V DC Gear Motor w/Encoder

    #75001
    $28.99
    ( 3988 In stock)

    The Maverick 12V DC Gear Motor 61:1 w/Encoder was designed for strength and endurance. 
     

    Specifications:

    • Voltage:                      12V DC
    • Amperage                   11A(full stall). Nominal operating current is 2.2A, at 12V it's 26.4W
    • Wattage                      132W
    • Length:                        134mm
    • Gear Ratios:                 61:1
    • Shaft Diameter:            6mm D-Shaft
    • Diameter:                     37mm
    • Stall Torque:                 50.5 kg-cm (702 oz-in)
    • RPM:                             100
    • Encoder:                       Hall effect/Quadrature, 6CPR, 1,464 pulse per revolution
    • Weight:                          326 grams
    • Power cable:                 PP45, 45cm, 14AWG
    • Encoder Cable:             45cm, 22AWG 4-pin
    • Step File

    nominal so operating current is 2.2A so at 12V this would 26.4W

    Multi-Mode Smart Servo

    #75002
    $23.99
    ( 488 In stock)

    The Studica Multi-Mode Smart Servo features all-steel gears and large amounts of torque. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.  
     

    Servo Horn 25T

    #76148
    $3.99
    ( 774 In stock)

    The Servo Horn 25T is made of anodized 6061-T6 Aluminum and is used with the Multi-Mode Smart Servo (75002) and the Studica building structure.

    M3 Kep Nut (100 pack)

    #76204-100
    $9.99
    ( 3033 In stock)

    End Piece Plate (2 pack)

    #76143-2
    $9.99
    ( 4041 In stock)

    The Studica End Piece Plate is commonly fastened to the inside end of the U Channel. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    Material: 6061-T6 Aluminum

     

     

    Servo Mount Flat Plate

    #76145
    $6.49
    ( 2446 In stock)

    The Servo Mount Flat Plate is one option to mount the Multi-Mode Smart Servo (75002) to the Studica building structure.