The Maverick Motor with 71.2:1 planetary gearbox features a high‑torque reduction system engineered for demanding robotic and automation applications. Its 6mm hex output shaft ensures secure coupling with Studica‑compatible components and other hex‑based mechanical systems. Built on Studica’s industrial‑grade motor platform, this unit provides reliable, consistent performance suited for precision‑controlled, heavy‑load mechanisms.

- For clamping use the 76141 Motor Mount Clamp Kit or the 76137 Clover Motor Mount

The 5mm Round Groove Belt is 3M long and has a 10% stretch. It is also referred to as a U Groove belt. 

• Material - Polyurethane
• Diameter - 5mm
• Length - 3m
• Color - Yellow
• Stretch factor - 10%
• Surface - smooth
• Solid core
• Open end

GT2-6mm Smooth Idler Pulley, H Type, w/3mm Inner Bore Bearing

The GT2-6mm Timing Belt Clamp w/Set Screw is used with all the GT2 belts. 

Specifications:

• Step file

This GT2 (also called 2GT) timing belt has a 2mm Pitch, 6mm width, and open 1000mm in length. Use any of the GT2 pulleys from Studica and the clamp kit.

Specifications:

• type: GT2 open-loop
• pitch: 2 mm
• width: 6 mm
• material: neoprene rubber, fiberglass reinforced
• belt shape: circular tooth profile

The 6mm diameter Hex Shaft is made of stainless steel and is used throughout our building system as drive components. The Hex Shaft profile is used with pulleys, gears and hubs when tightening the set screws and creating a non-slip connection.

The 6mm diameter Hex Shaft is made of stainless steel and is used throughout our building system as drive components. The Hex Shaft profile is used with pulleys, gears and hubs when tightening the set screws and creating a non-slip connection.

The 6mm x 96mm Hex Shaft is made of stainless steel and is used throughout our building system as drive components. The Hex Shaft profile is used with pulleys, gears and hubs when tightening the set screws and creating a non-slip connection.

The Studica Robotics 6mm x 432mm Hex Shaft is made of stainless steel and is used throughout our building system as drive components. The Hex Shaft profile is used with pulleys, gears and hubs when tightening the set screws and creating a non-slip connection.

The Studica Robotics 10mm OD round groove 6mm Hex pulley is for use with your robot design builds.

The Studica Robotics 30mm OD round groove 6mm hex pulley is for use with robotics design builds. 

The Studica Robotics 6mm Hex Shaft Hub (4 pack) is used to connect any Studica wheel and/or motor with a 6mm shaft.

The Studica Robotics 6mm Hex shaft collar clamp (2-piece) has a 6mm Hex hole and dimensions of 20mm x 8mm.

The Studica Robotics 6mm Hex Shaft Face Bearing Block can be mounted on any channel and bracket allowing for a 6mm ID through hole for 6mm shafts (axles). The block has a permanently installed Standard Sealed Bearing and has 8 x M3 tapped through holes for easy mounting.

The Studica Robotics Hex Shaft Collar is 6mm ID and 12mm OD. The inside diameter will fit any of the Hex Shaft axles.

This Studica Robotics 1mm nylon spacer 24-pack is used to space gears, sprockets, wheels, and other parts along a 6mm Hex shaft. Mix and match with various spacer lengths.

This 1mm Spacer is used to space gears, sprockets, wheels, and other parts along a 6mm Hex shaft. Mix and match various spacer lengths.

This 5mm Spacer is used to space gears, sprockets, wheels, and other parts along a 6mm Hex shaft. Mix and match various spacer lengths.

This 20mm Spacer is used to space gears, sprockets, wheels, and other parts along a 6mm Hex shaft. Mix and match various spacer lengths.

The Studica Robotics 20 Tooth GT2-6mm Timing Belt Hex Shaft Pulley can be used with any of the GT2 belts. 

The Studica Robotics 40 Tooth GT2-6mm Timing Belt Hex Shaft Pulley can be used with any of the GT2 belts in your robotics builds.

Enhance your robotics projects with the Studica Robotics 13 and 26 Tooth D-Shaft Helical Bevel Gear Set. Designed for precision and durability, this gear set made of zinc-plated 20CrMnTi hardened steel is perfect for robotics applications, offering smooth operation and reliable performance. Ideal for FTC custom robot builds and gear systems.

The Studica Robotics 6mm Hex Shaft Low Profile Clamping Hub V2 is an ideal fit for our motors.

Step File

The XL series belt is compatible with the 6mm, 10 tooth XL pulley.

Specifications:

• Material: Neoprene with Fiberglass cords
• Length: 1 meter
• Width: 9mm
• Closed loop