Shop
Shop
30 Tooth GT2 6mm Timing Belt D Shaft Pulley
The 30 Tooth GT2 6mm Timing Belt Pulley can be used with any of the GT2 belts.
Specifications:
- 30 Tooth Timing Pulley
- 6mm Bore
- Material: 6061 T6 Aluminum
- Step File
40 Tooth GT2 6mm Timing Belt D Shaft Pulley
The 40 Tooth GT2 6mm Timing Belt Pulley can be used with any of the GT2 belts.
Specifications:
- 40 Tooth Timing Pulley
- 6mm Bore
- Material: 6061 T6 Aluminum
- Step File
60 Tooth GT26mm Timing Belt D Shaft Pulley
The 60 Tooth GT2 6mm Timing Belt Pulley can be used with any of the GT2 belts.
Specifications:
- 60 Tooth Timing Pulley
- 6mm Bore
- Material: 6061 T6 Aluminum
- Step File
80 Tooth GT2 6mm Timing Belt D Shaft Pulley
The 80 Tooth GT2 6mm Timing Belt Pulley can be used with any of the GT2 belts.
Specifications:
- 80 Tooth Timing Pulley
- 6mm Bore
- Material: 6061 T6 Aluminum
- Step File
GT2-6mm Smooth D Shaft Idler Pulley, H Type, w/3mm Inner Bore Bearing
GT2-6mm Smooth Idler Pulley, H Type, w/3mm Inner Bore Bearing
GT2 Timing Belt, 2mm Pitch, 6mm width, 140mm Closed, (2 pack)
This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width
Specifications:
- type: GT2 closed-loop 140mm
- pitch: 2 mm
- width: 6 mm
- material: neoprene rubber, fiberglass reinforced
- belt shape: circular tooth profile
GT2 Timing Belt, 2mm Pitch, 6mm width, 108mm Closed, (2 pack)
This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width
Specifications:
- type: GT2 closed-loop 108mm
- pitch: 2 mm
- width: 6 mm
- material: neoprene rubber, fiberglass reinforced
- belt shape: circular tooth profile
GT2 Timing Belt, 2mm Pitch, 6mm width, 190mm Closed, (2 pack)
This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width
Specifications:
- type: GT2 closed-loop 190mm
- pitch: 2 mm
- width: 6 mm
- material: neoprene rubber, fiberglass reinforced
- belt shape: circular tooth profile
GT2 Timing Belt, 2mm Pitch, 6mm width, 240mm Closed, (2 pack)
This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width
Specifications:
- type: GT2 closed-loop 240mm
- pitch: 2 mm
- width: 6 mm
- material: neoprene rubber, fiberglass reinforced
- belt shape: circular tooth profile
GT2 Timing Belt, 2mm Pitch, 6mm width, 630mm Closed, (2 pack)
This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width
Specifications:
- type: GT2 closed-loop 630mm
- pitch: 2 mm
- width: 6 mm
- material: neoprene rubber, fiberglass reinforced
- belt shape: circular tooth profile
GT2 Timing Belt, 2mm Pitch, 6mm width, 810mm Closed, (2 pack)
This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width
Specifications:
- type: GT2 closed-loop 810mm
- pitch: 2 mm
- width: 6 mm
- material: neoprene rubber, fiberglass reinforced
- belt shape: circular tooth profile
GT2 Timing Belt, 2mm Pitch, 6mm width, 1000mm Open, (2 pack)
This GT2 (also called 2GT) timing belt has a 2mm Pitch, 6mm width, and open 1000mm in length. Use any of the GT2 pulleys from Studica and the clamp kit.
Specifications:
- type: GT2 open-loop
- pitch: 2 mm
- width: 6 mm
- material: neoprene rubber, fiberglass reinforced
- belt shape: circular tooth profile
GT2 Timing Belt, 2mm Pitch, 6mm width, 330mm Closed, (2 pack)
This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width
Specifications:
- type: GT2 closed-loop 330mm
- pitch: 2 mm
- width: 6 mm
- material: neoprene rubber, fiberglass reinforced
- belt shape: circular tooth profile
WorldSkills 2022 Special Edition Work Order Board
The WSC2022SE Work Order Board is a wall board that is made to scale based on the challenge document. It has an adhesive backing to stick to the wall of the court, and front section is metal and ABS that will allow for magnetic material to adhere to it.
Used together with the WSC2022SE Wall Board Instruction Set, part number 75105, which are the magnetic instruction pieces that will adhere to the wall board.
GT2 Timing Belt, 2mm Pitch, 6mm width, 160mm Closed, (2 pack)
This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width
Specifications:
- type: GT2 closed-loop 160mm
- pitch: 2 mm
- width: 6 mm
- material: neoprene rubber, fiberglass reinforced
- belt shape: circular tooth profile
1mm Thick M3 Screw Spacer (25 pack)
Made from delrin in blue, this M3 Screw Spacer has a 3.2mm ID x 5.5mm OD x 1mm thick. Use it for any M3 screw.
2mm Thick M3 Screw Spacer (25 pack)
Made from delrin in blue, this M3 Screw Spacer has a 3.2mm ID x 5.5mm OD x 2mm thick. Use it for any M3 screw.
5mm Thick M3 Screw Spacer (10 pack)
Made from delrin in blue, this M3 Screw Spacer has a 3.2mm ID x 5.5mm OD x 5mm thick. Use it for any M3 screw.
Clamping 6mm D Shaft Hub
Made of aluminum, the Studica Clamping 6mm D Shaft Hub is used with flex and drive wheels
Specifcation:
- Material: 6061-T6 Aluminum
- 6mm ID
- Hole pattern for connecting to structure
- Step File
Light Weight 6mm D Shaft Hub (2 Pack)
The Studica Light Weight 6mm D Shaft Hub is used with the 6mm D shafts. It has a 5mm set screw for tight clamping and seven M3 tapped mounting holes.
Specifcation:
- Material: 6061-T6 Aluminum
- 6mm D Shaft ID
- M3 tapped hole pattern for connecting to structure
- Step File
432mm L-Beam (2 pack)
The Studica L-Beam is available in 9 different lengths from 48mm to 432mm. It is strong while light weight. It can be easily cut to your own custom size. The hole pattern matches the hole patterns in the Studica U-Channel, Low Profile U-Channel, and the various plates.
Specifcations,
- Material: 6061-T6 Aluminum
- Length: 432mm
- Width: 14mm
- Height: 14mm
- Thickness: 3mm
- Hole Diameter: 3.5mm
- Weight: 0.08kg
- Step File
384mm L-Beam (2 pack)
The Studica L-Beam is available in 9 different lengths from 48mm to 432mm. It is strong while light weight. It can be easily cut to your own custom size. The hole pattern matches the hole patterns in the Studica U-Channel, Low Profile U-Channel, and the various plates.
Specifcations,
- Material: 6061-T6 Aluminum
- Length: 384mm
- Width: 14mm
- Height: 14mm
- Thickness: 3mm
- Hole Diameter: 3.5mm
- Weight: 0.068kg
- Step File