The Linear RC Actuator 140mm 50N is a new Servo motor which has a stroke of 140mm, a force of 50N
The Linear RC Actuator 50mm 50N has a stroke of 50mm, a force of 50N
The Linear RC Actuator 50mm 200N is a new Servo motor which has a stroke of 50mm, a force of 200N
The Linear RC Actuator 140mm 200N is a new Servo motor which has a stroke of 140mm, a force of 200N
The Studica Multi-Mode Smart Servo features all-steel gears and large amounts of torque. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.
Type: Metal Brush Motor
Horn Gear Spline: 25T (5.9mm)
Size: 40mm x 20.1mm x 38.3mm
Maximum Speed: 62RPM at 6V
Stall Torque: 20kg.cm at 6V
Voltage: 6-7 4V
Cable: 22AWG, 75cm
The Studica Smart Robot Servo Programmer is used for programming the Studica Multi-Model Smart Servo Motor and for testing other standard Servos. Use it to program the Studica Servo to switch between continuous mode, standard mode, or any custom angular mode.
Use it to power the Studica Smart Robot Servo Programmer or any other device requiring 6V output and a TJC8 connector.
The Studica Servo Power Module is a 6V, 60W power injector that enables the use of high-power RC servos. The Servo Power Module passes through input signals unaltered while providing up to 60W of total output power across all eight channels. The input and output channels accept standard 3-wire, 0.1” pitch, servo/PWM cables.