The 30 Tooth GT2 6mm Timing Belt Pulley can be used with any of the GT2 belts. 

Specifications:

• 30 Tooth Timing Pulley
• 6mm Bore 
• Material: 6061 T6 Aluminum
• Step File

The 40 Tooth GT2 6mm Timing Belt Pulley can be used with any of the GT2 belts. 

Specifications:

• 40 Tooth Timing Pulley
• 6mm Bore 
• Material: 6061 T6 Aluminum
• Step File

The 60 Tooth GT2 6mm Timing Belt Pulley can be used with any of the GT2 belts. 

Specifications:

• 60 Tooth Timing Pulley
• 6mm Bore 
• Material: 6061 T6 Aluminum
• Step File

The 80 Tooth GT2 6mm Timing Belt Pulley can be used with any of the GT2 belts. 

Specifications:

• 80 Tooth Timing Pulley
• 6mm Bore 
• Material: 6061 T6 Aluminum
• Step File

Made of aluminum, the Studica Clamping 6mm D Shaft Hub is used with flex and drive wheels 

Specifcation:

• Material: 6061-T6 Aluminum
• 6mm ID
• Hole pattern for connecting to structure
• Step File 

The Studica Light Weight 6mm D Shaft Hub is used with the 6mm D shafts. It has a 5mm set screw for tight clamping and seven M3 tapped mounting holes.

Specifcation:

• Material: 6061-T6 Aluminum
• 6mm D Shaft ID
• M3 tapped hole pattern for connecting to structure
• Step File 

The Small Thrust Ball Bearing is used for vertical and axial loads to withstand heavy loads. These ball bearings have track grooves on the upper and lower track boards to reduce friction. Use these with structure for any hole where an axial load will be applied.

Specifications:

• Bore Diameter - 6mm
• Outer Diameter - 12mm
• Outer Diameter Pilot: 11.8mm
• Ball Diameter: 2mm
• Height - 4.5mm
• Material: Chrome Steel GCr15
• Step file

The Studica Slide Rail is made of light weight aluminum, is 24mm wide, and is perfect for building a multi-stage slide system. Closed length is 288m, with a 180mm stroke, creating a 468mm extended length. 

Specifications:

• Width: 24mm
• Height: 7.2mm
• Length: 288mm
• Stroke: 180mm
• Extendended length: 468mm
• Material: 6061 Aluminum
• Step files

See videos,

- https://www.instagram.com/reels/DJUsZyoxhCp/

- https://ca.pinterest.com/pin/10414642882490443/

- https://www.tiktok.com/@studica/video/7375236680854277419

- https://www.tiktok.com/@studica/video/7444299434856303918

- https://www.tiktok.com/@studica/video/7501405936779545902

The Studica Servo Arm Extended can be used with the Multi Mode Servo, Multi Mode Servo 200, or most servos with a 25 Tooth gear.

Specifcations:

• Spline: 25 Tooth, 3.8mm deep
• Length: 56mm
• Width: 14mm
• Height: 7.8mm
• Material: 6061-T6 Aluminum
• Step File

The Studica Servo Arm can be used with the Multi Mode Servo, Multi Mode Servo 200, or most servos with a 25 Tooth gear.

Specifcations:

• Spline: 25 Tooth, 3.8mm deep
• Length: 33mm
• Width: 14mm
• Height: 7.8mm
• Material: 6061-T6 Aluminum
• Step File

The Studica 6mm D Shaft Face Bearing Block can be mounted on any Studica channel and bracket providing which will allow for a 6mm ID through hole for 6mm shafts (axles). It has a permanently installed Standard Sealed Bearing. Has 8 x M3 tapped through holes for easy mounting.

The Studica Servo Spline Gear is a 30 Tooth Gear with a 25 Tooth Spline. It is used with the Studica Multi-Mode Smart Servo or Studica Multi-Mode Smart Servo 200.

Specifications:

• Material: Steel Hardened, Zinc plated
• Step File

64 Tooth 5mm Pitch GT2
Belt 9mm wide
Rubber

Black

• GT2 Pulley
• Φ41.2mm*13.0mm thick
• M3 pass through holes SHCS should
• sit flush
• Bearing hole, the bearing should
• AL6061-T6
• Step File

• Φ29.0mm*16.0mm thick
• 6*M3 thread tapping through (including 2*M3 thread for M3 SHCS)
• Φ6.0mm D hole
• AL6061-T6
• Step File

• Φ20.0mm*8.0mm thick
• 2*M3 thread for M3 SHCS on the clamp side
• Φ6.0mm D hole
• AL6061-T6
• Step File

The Studica Robotics 38mm Omni Wheel was designed as an odometry wheel that can fit inside most channel sizes. For ease of use, three cores were designed to fit the 6mm D-Shaft Center, 5mm Hex Center, 6mm Hex Center, and 7mm Hex Center. The wheel is open for easy use in any ecosystem with the provided different-sized cores.

Specifications:

• Diameter: 38mm
• Number of rollers: 8
• Body Material: Delrin
• Roller Material: TPE/TPU 80A
• Max Load: 2kg
• Weight:
   

Includes:

• 38mm Omni wheel with 6mm D-Shaft Center, pre-installed
• 5mm Hex Center
• 6mm Hex Center (now also included)
• 7mm Hex Center

The 100mm Slim Mecanum Wheel Set comes with 2 left and 2 right, with steel ball bearings, blue steel frame and black rollers.  The wheel comprised of 12 black rollers and is able to move in any direction. Rollers are set at 45° to the axis of rotation of the wheel.  Rollers are mounted with steel ball bearings, making the roll more fluent.

Step File

The 125mm All-Terrain Wheel Set includes two left and two right rubber wheels. They have a foam core and therefore do not require air. They grip well on smooth, hard surfaces and are perfect for travel on uneven surfaces where you may have mulch, sand, dirt, or gravel. They are designed and manufactured by Studica to work with the Studica Robotics Building platform and other building sets. The All-Terrain wheels have been tested up to 40kg (88 lbs) using all four wheels.

Specifications,

• 2 Left Wheels and 2 Right Wheels
• Diameter: 125mm Width:
• 47.1mm
• Step files

Made of aluminum, the Studica Clamping 6mm D Shaft Hub - v2 is used with flex and drive wheels 

Specifcation:

• Material: 6061-T6 Aluminum
• 6mm ID
• Hole pattern for connecting to structure
• Step File

The Studica Linear Servo RC Actuator 50S-40N is a new Servo motor which has a stroke of 50mm, Max Force load of 50N and stroke spead of 26mm/s. It works the same way as the any standard rotary servo but in a linear movement. It uses the same 2.54mm Dupont 3-Pin Female wire connector and can be controlled with an RC receiver or any device that controls a servo. Includes mounting brackets.

The Studica Robotics Intake Hex Shaft Hub Kit can be used to create intake systems and is ideal for the FIRST Technical Challenge (FTC) and World Robotics Olympiad (WRO). Can be used with the Silicone Rubber Tubing #76410 (sold separately).

The Studica Robotics 6mm Hex Shaft Servo Hub 25T is made of anodized 6061-T6 Aluminum and is used to connect a servo motor to a Hex Shaft axle.

The Studica Robotics 6mm Hex-Shaft Rack and Pinion Set includes 1 Rack, 1 Pinion, and 2 Glides. The rack hole pattern matches that of the channel, flat beams, square beams and flat brackets so it's easy to mount on the Studica Robotics structure.