The Studica Robotics 36-Tooth Hex Shaft Helical Bevel Gear 1:1 Set is designed to enhance motion control in robotics applications. This gear set, made of titanium-plated hardened steel features helical bevel gears with 36 teeth, optimized for use with 6mm hex shafts, providing a 1:1 gear ratio. Ideal for transmitting motion between perpendicular shafts, it ensures smooth and efficient power transfer in your robotic designs.

The 6mm Hex Shaft Flanged Bearing fits any of the channel and flat brackets with the common hole pattern having a center hole of 14mm. The inside diameter will fit any of the 6mm Hex Shaft axel.

• Quantity: 12
• Material: AISI440C stainless steel
• Sealed Type: ZZ metal shields
• Precision: ABEC-3
• Clearance: C0
• Lubrication:Kyodo SRL Grease
• ID (inner diameter)/Bore:6 mm Hex
• OD (outer diameter): 14 mm
• OD of Flanged Size: 15 mm
• Width: 5 mm
• Thickness of Flange: 1 mm

The Studica Robotics XT30 Male to JST-VH cable is for use with the Servo Power Block (75006) and the FTC Power Block (70407).

The Studica 12V 1,800mAh NiMH (nickel metal hydride) Battery Pack, PP45 in Black comes with a w/20 amp fuse. It is a 10-cell, 12-volt rechargeable battery pack.  A great value and only while quantities last.

The Studica NiMH Battery Pack Charger, PP45, is required to charge the battery.

Specifications,

• Dimensions: 5 x 2.1 x 2.1 inches (115 mm x 45 mm x 50 mm)
• Weight: 1.32lbs (600 g)
• 12V, internal 8-9mΩ per cell
• Built-in 20-amp replaceable fuse for safety
• 10-cell pack provides 1,800-mAh capacity 
• PP45 connector for easy and safe connection to controller
• Step File

The Maverick Encoder Cable for FTC will connect the Maverick DC Gear Motor to the REV Control Hub.

Note: FTC Teams can purchase from our US store

Specifications,

• 14AWG Parallel cable, silicone insulation
• XT30 Male type connector,Brass gold plated,PA
• XT30 Female type connector,Brass gold plated,PA
• 50cm length
• RoHS Compliant

Specifications,

• 14AWG Parallel cable, silicone insulation
• 45A Anderson type single pole connector,Red & Black.
• XT30 Female type connector,Brass gold plated,PA
• 12cm length
• RoHS Compliant

Specifications,

• 16AWG Parallel cable, silicone insulation
• 45A Anderson type single pole connector,Red & Black
• JST VH terminal, VH3.96mm Type
• 10cm length
• RoHS Compliant

The Studica T-Mini Lidar is a 360-degree 2D LiDAR sensor. Utilizing Time-of-Flight (ToF) technology, it integrates advanced optical, electronic, and algorithmic designs to deliver high-precision laser distance measurements. During operation, its mechanical structure rotates 360 degrees, capturing continuous angle data. This enables comprehensive 360-degree scanning and generates point cloud data representing the scanned environment.

Includes,

• T-Mini Lidar
• Base for attaching T-Mini to Studica Robotics Structure
• USB Adapter Board
• USB Type A to Type C Video Cable 
• JST-PH 5 pin to JST-GH 4 pin Cable

STEP File

Introducing The Mecanum Stack Robot Basic - Autonomous Mobile Robotics Trainer by Studica Robotics with mecanum wheels, a cutting-edge robotics trainer designed to ignite your passion for learning robotics like never before! This Trainer is a great value and its compact size is ideal for groups of two to three to participate in hands-on learning. It's easy to build and take apart. The top platform is ideal for adding an arm. You can also add multiple levels.

This versatile kit is ideal for classrooms from high school through university and research environments. It’s also the perfect solution for competitions such as RoboCup Search and Rescue and RoboCup@Work.

* For Hex Shaft, please comment 70225BH

The RoboCup Smart Farming Collection is the official kit that will be used by teams for the RoboCup@Work League which will focus on Autonomous Mobile Robotics in Agriculture.

Autonomous mobile robots are revolutionizing agriculture by enhancing efficiency, precision, and sustainability. Robots perform tasks such as planting, weeding, harvesting, and monitoring crop health using advanced sensors, AI, and GPS navigation. They reduce labor costs, optimize resource use, and minimize environmental impact by applying fertilizers and pesticides with pinpoint accuracy. Additionally, autonomous drones, robots collect real-time data, helping farmers make informed decisions to improve yields and sustainability.

RoboCup Teams will build a robot onsite using the RoboCup Smart Farming Collection. They will be allowed to bring a maximum specified weight of 3D printed and acrylic parts to complete their robots. The kickoff event will be in Germany in March with the final international event, RoboCup 2025 Salvador,  15 to 21 July in Bahia, Brazil.

*** Click here to see what's included in the collection

The WSVTOL kit is a versatile and advanced vertical take-off and landing (VTOL) fixed-wing drone designed for multiple applications, including inspection, surveying, mapping, and monitoring. With a wingspan of 2180mm and a wing area of 53dm², it offers stable and efficient flight performance.

The VTOL operates at a cruising speed of 17-22m/s and can reach a ceiling altitude of 6500m, making it suitable for high-altitude missions.

Key specifications include a take-off weight of less than 7kg, a payload capacity of up to 1kg, and impressive endurance capabilities: 136 minutes for mapping and 125 minutes for monitoring, with a respective range of 144km and 126km. The drone is built from durable materials such as EPO, carbon fiber, aviation aluminum alloy, and engineering plastics, ensuring robustness and reliability.

The Studica WS500 UAV Quadcopter Kit is a lightweight robust UAV open platform specially designed for learning and teaching. It comes with the WS500 EDU Frame Kit and motors, ESCs, power frame integrated power distribution panel. It has a CubePilot flight controller with companion Raspberry Pi 5, an optical flow and distance sensor module with 6-axs IMU, a ToF (Time of Flight) 3D depth camera (with custom mount), and T-mini Plus lidar for obstacle avoidance and advanced navigation. 

All tools for installation are provided in box.

Note: Battery not included. We recommend 4S 5200mAh + with XT60 Lipo Battery. You can purchase this in your local country.

Four gauge wire is great for large current draw applications such as battery cables and distribution between primary breakers and distribution boards.

UL Rated 30056 Silicone-covered copper wire in a flexible sheath.

Six gauge wire is great for large current draw applications such as battery cables and distribution between primary breakers and distribution boards.

UL Rated 30056 Silicone-covered copper wire in a flexible sheath.

UL Rated 3135 Silicone-covered copper wire in a flexible sheath.

UL Rated 3135 Silicone-covered copper wire in a flexible sheath.

UL Rated 3135 Silicone-covered copper wire in a flexible sheath.

This is a twisted pair of 22 AWG (gauge) silicone wire, packaged within a plastic cable sleeve. This cable is designed to be used as a CAN Bus cable.

UL Rated 3135 Silicone-covered copper wire in a flexible sheath.

UL Rated 3135 Silicone-covered copper wire in a flexible sheath.

UL Rated 3135 Silicone-covered copper wire in a flexible sheath.