The 120 Degree Bracket is perfect for connecting two channel pieces at 120 degrees from each other. Each side is 48mm wide to fit perfectly on the channel. Use three brackets with 3 channel pieces to make 3 wheeled robots. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

Specifications:

• Material - Anodized 6061-T6 Aluminum
• Thickness - 3mm
• Step File

This 5.5mm Combination Wrench ships with most of our kits works with all the M3 nuts available on our store.

5 Blue, 5 White, and 5 Yellow

The WSC2022SE Wall Board Instruction Set are flat magnets, like refrigerator magnets, that will adhere to the WSC2022SE Work Order Board. The set includes 20 pieces in total.

Specifications:

• Made of Magnets and ABS
• Includes,
  • 5 blue medicine cube magnets
  • 5 white medicine cube magnets
  • 5 hazardous material cubes magnets
  • 5 gurney picture magnets

You can use these with the WSC2022SE Work Order Board, part # 75104

May be used with 6mm D-Shape Shaft to secure wheels in their position.

Specifications:

• Φ20.0mm*8.0mm thick
• 1*M3 thread for M3 SHCS on the clamp side
• Φ6.0mm D hole
• AL6061-T6
• Step File

The WSC2022SE Work Order Board is a wall board that is made to scale based on the challenge document. It has an adhesive backing to stick to the wall of the court, and front section is metal and ABS that will allow for magnetic material to adhere to it.

Used together with the WSC2022SE Wall Board Instruction Set, part number 75105, which are the magnetic instruction pieces that will adhere to the wall board.

The Studica L-Beam is available in 9 different lengths from 48mm to 432mm. It is strong while light weight. It can be easily cut to your own custom size. The hole pattern matches the hole patterns in the Studica U-Channel, Low Profile U-Channel, and the various plates.

Specifcations,

• Material:  6061-T6 Aluminum
• Length: 288mm
• Width: 14mm
• Height: 14mm
• Thickness: 3mm
• Hole Diameter: 3.5mm
• Weight: 0.051kg
• Step File

Specifications:

• 7 color pcs
• 1.5, 2, 2.5, 3, 4, 5, 6
• Non-slip handle
• ball-end and straight-end
• S2 Hardness
• Non-corrosive
• Weight: 0.118kg

Specifications:

• Material: 6061-T6 Aluminum
• Thickness: 6mm
• Step File

Made of Nylon, the Studica Rubber Foot is used with the Studica Robotics building structure and for many other uses.

Specifications:

• Material: Nylon
• Outside OD: 24mm
• Inner OD: 21mm
• Height: 24mm
• Step File

• 42.0mm*42.0mm*11.3mm thick
• 16*M3*8.0mm thread
• M3 pass through holes
• SHCS sit flush
• Material - AL6061-T6
• Step File

• For 5.5mm nuts
• CRV material
• heat treatment
• surface matt chrome plated
• 100mm exposure shank
• socket head cold heading treatment

The Lyon Challenge Elements are used to train for the WorldSkills Lyon 2024 Mobile Robotics Competition. 

The Lyon Fruit and Vegetable Kit can be used to train for the Lyon 2024 Competition where on days 1 and 2 various autonomous mobile robot skills will be assessed. There are 10 fruits and vegetables that are at a one-to-one scale to the real produce. Note these may or may not be used in the competition.

The package includes,

• 1 Orange
• 1 Peach
• 1 Green Apple
• 1 Pomegranate
• 1 Garlic head
• 1 Banana
• 1 Kiwi
• 1 Mangosteen
• 1 Lime (Lemon)
• 1 Red Pepper
   

The WorldSkills Mobile Robotics Junior Collection by Studica is the authorized collection for the WorldSkills Mobile Robotics Junior Competition. This comprehensive Collection includes over 1,400 items including controller, electronics, motors, structure, gears, sprockets, pulleys, belts, axles, slides, rack & pinion, wheels, bushings, bearings, coupling, collars, spacers, screws, nuts, and standoffs. 

Download brochure and BOM

This small two-wheel differential robot is perfect for learning the basics of robotics and ROS2. This robot was the one chosen and loved during the WorldSkills Lyon Autonomous Mobile Robotics Navigation Module.

* For Hex Shaft, please comment 70222H

Bill of Materials

The WorldSkills Junior Stack Robot Collection by Studica is the authorized collection for the WorldSkills Mobile Robotics Junior Competition. This comprehensive Collection includes the controller, electronics, motors, structure, gears, wheels, bushings, bearings, coupling, collars, spacers, screws, nuts, and standoffs. 

Download brochure and BOM

Use this bracket to secure the IR Range Sensor to the Studica structure.

• Step File

The Maverick Motor with 1:1 planetary gearbox features a high‑torque reduction system engineered for demanding robotic and automation applications. Its 6mm hex output shaft ensures secure coupling with Studica‑compatible components and other hex‑based mechanical systems. Built on Studica’s industrial‑grade motor platform, this unit provides reliable, consistent performance suited for precision‑controlled, heavy‑load mechanisms.

- For clamping use the 76141 Motor Mount Clamp Kit or the 76137 Clover Motor Mount

M3 Stainless Steel Nyloc Nut (100 pack)

• Step File

This Hex Ball End Screwdriver can be used with most of the M3 screws.

Made from delrin in blue, this M3 Screw Spacer has a 3.2mm ID x 5.5mm OD x 1mm thick. Use it for any M3 screw.

Made from delrin in blue, this M3 Screw Spacer has a 3.2mm ID x 5.5mm OD x 2mm thick. Use it for any M3 screw.

Made from delrin in blue, this M3 Screw Spacer has a 3.2mm ID x 5.5mm OD x 5mm thick. Use it for any M3 screw.