Includes,

• 4 - 110mm All-Terrain Tire 2/6mm Adapter  76250
• 2 - Shock Absorber, 1/10 Aluminum, 100mm (2 pack)  76351-2
• 1 - 6mm x 96mm D-Shaft (6 pack)  76161-6
• 1 - Collar 6mm ID D-Shaft, 12mm OD (6 pack)  76304-6
• 1 - Flange Bearing 6mm ID, 14mm OD, 15mm Flange (12 pack)  76302-12
• 1 - Shaft Spacer Plastic 6mm ID x 10mm OD x 1mm L (24 pack)  76305-24

The Studica Analog Module

• Includes JST-SH to JST-GH Cable
• Operating Voltage (VDD): 2.0V-5.5V
• Operating Temperature: -40°C to 125°C
• Operation Modes: Single-Shot, Continuous-Conversion (Default), and Duty Cycling
• Analog Inputs:
  • Measurement Type: Single-Ended (Default)
  • Input Voltage Range: GND to VDD
  • Full Scale Range (FSR): ±.256V to ±6.114V (Default: 2.048V)
• Resolution:
  • 12-bit (Differential) or 11-bit (Single-Ended)
  • LSB size: 0.125mV - 3mV (Default: 1 mV)
• Sample Rate: 128 Hz to 3.3 kHz (Default: 1600SPS)
• Current Consumption (Typical): 150μA-200μA
• I2C Address: 0x48 (Default), 0x49, 0x4A, or 0x4B
• Four unique I2C addresses:
  • 0x48
  • 0x49
  • 0x4A
  • 0x4B
• Step File

Used to attach the Studica battery to the channel.

• Step File

This is used and recommended in the Waste Management Robotics Competition. 

Specifications,

• Maximum Dimmensions - 125mm x 88mm x 71mm 
• Color - Yellow

Includes,

• 3 - 120 Degree Bracket (2 pack)  76080-2
• 2 - 90 Degree Bracket (2 pack)  76081-2
• 2 - 135 Degree Bracket (2 pack)  76082-2
• 2 - 96mm Adjustable Flat Bracket (2 pack)  76083-2
• 1 - T Bracket (2 pack)  76084-2
• 1 - X Bracket (2 pack)  76085-2
• 4 - Inside U Bracket (2 pack)  76086-2
• 4 - L Bracket (2 pack)  76087-2
• 4 - Inside L Bracket (2 pack)  76089-2

The Bronze Bushing 6mm ID x 14mm OD fits any of the channel and flat brackets having the common center hole pattern of 14mm. The inside diameter will fit any of the D-Shaft axels.

• Material:  bronze
• Inside Diameter: 6 mm
• Outside Diameter: 14 mm
• Step File

The D-Shaft Collar is 6mm ID and 12mm OD. The inside diameter will fit any of the D-Shaft axels.

Specifcations:

• Material: 6061-T6 Aluminum

• Step File

Includes,

• 1 - 24 Tooth - Sprocket (2 pack)  76226-2
• 1 - 32 Tooth - Sprocket (2 pack)  76227-2
• 2 - 40 Tooth - Sprocket  76228
• 2 - 48 Tooth - Sprocket  76229
• 1 - #25 Chain with Master Links, 5 feet(152cm) 76230
• 2 - 6mm Shaft Hub (4 pack)  76284-4
• 1 - Bushing Bronze 6mm ID x 8mm OD (12 Pack)  76300-12
• 1 - Bushing Bronze 6mm ID x 14mm OD (12 Pack)  76301-12
• 1 - Flange Bearing  6mm ID, 14mm OD, 15mm Flange (12 Pack)  76302
• 1 - Chain Breaker Tool  76231
• 1 - M3 x 12mm Socket Head Cap Screw (pack of 100)  76202-100
• 2 - Collar 6mm ID D-Shaft, 12mm OD (6 pack)  76304-6
• 1 - Shaft Spacer Plastic 6mm ID x 10mm OD x 1mm L (24 pack)  76305-24

The easy way to change the length of your #25 chain. (Chain not included)

- See Instructions for use

Ideal for the myRIO.

• Inside Contact Diameter: 2.1mm
• Outside Contact Diameter: 5.5mm
• Termination Style: Solder Cup
• Voltage Rating: 12 V
• 6 Amp
• 1 meter cord length
• 18AWG or 20AWG wire guage
• DC connector type

Ideal for the myRIO.

• Inside Contact Diameter: 2.1mm
• Outside Contact Diameter: 5.5mm
• Termination Style: Solder Cup
• Voltage Rating: 12 V
• 6 Amp
• 1 meter cord length
• 18AWG or 20AWG wire guage
• DC connector type

The D-Shaft Collar is 6mm ID and 12mm OD. The inside diameter will fit any of the D-Shaft axels.

Specifcations:

• Material: 6061-T6 Aluminum

• Step File

Use the Dupont Single Pin - 4 wire - female to female cable with the Ultrasonic Distance Sensor

Specifications: 

• Dupont Single Pin
• 4 wire
• female to female cable
• Length: 50cm
• Gauge: 22AWG

This plate is used in the Autonomous Mobile Robotics Workshop Kit

The Studica End Piece Plate is commonly fastened to the inside end of the U Channel. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

Specifications:

Material: 6061-T6 Aluminum

• Step File

Includes,

• 2 - 336mm U-Channel  - 76012
• 1 - 288mm U-Channel (2 pack)  - 76013-2
• 2 - 144mm U-Channel (2 pack) - 76016-2
• 2 - 96mm U-Channel (2 pack)  - 76017-2
• 2 - 48mm U-Channel (2 pack)  - 76018-2
• 2 - 336mm x 40mm Flat Bracket  - 76060
• 1 - 288mm x 40mm Flat Bracket (2 pack)  - 76061-2
• 1- 192mm x 40mm Flat Bracket  - 76063-2
• 1 - 144mm x 40mm Flat Bracket  - 76064-2
• 1 - 96mm x 40mm Flat Bracket  - 76065-2
• 1 - 192mm x 96mm Flat Bracket (2 pack)  - 76066-2
• 3 - L Bracket (2 pack)  - 76087-2
• 3 - Inside L Bracket (2 pack)  - 76089-2
• 1 - 6mm x 96mm D-Shaft (6 pack)  - 76161-6
• 2 - Collar 6mm ID D-Shaft, 12mm OD (6 pack)  - 76304-6
• 1 - Bushing Bronze 6mm ID x 8mm OD (12 Pack) - 76300-12
• 1 - Bushing Bronze 6mm ID x 14mm OD (12 Pack) - 76301-12
• 1 - Flange Bearing  6mm ID, 14mm OD, 15mm Flange (12 Pack) - 76302
• 1 - Shaft Spacer Plastic 6mm ID x 10mm OD x 1mm L (24 pack)  - 76305-24
• 1 - Shaft Spacer Plastic 6mm ID x 10mm OD x 2mm L (24 pack)  - 76306-24
• 2 - 6mm Shaft Hub (4 pack)  - 76284-4
• 2 - 32 Tooth Gear (2 pack)  - 76220-2
• 1 - 64 Tooth Gear (2 pack)  - 76221-2
• 2 - 128 Tooth Gear  - 76222
• 1 - Rack & Pinion  - 76170
• 1 - Multi-Mode Smart Servo  - 75002
• 1 - M3 x 8mm Socket Head Cap Screw (pack of 100)  - 76200-100
• 1 - M3 x 10mm Socket Head Cap Screw (pack of 100)  - 76201-100
• 1 - M3 x 12mm Socket Head Cap Screw (pack of 100)  - 76202-100
• 1 - M3 x 10mm Button Head Cap Screw (pack of 50)  - 76203-50
• 1 - M3 Kep Nut (pack of 100)  - 76204-100
• 1 - 25mm Standoff (12 pack)  - 76182-12
• 1 - 48mm Standoff (12 pack)  - 76181-12

Includes,

• 2 - M3 x 8mm Socket Head Cap Screw (pack of 100)  76200-100
• 2 - M3 x 10mm Socket Head Cap Screw (pack of 100)  76201-100
• 2 - M3 x 12mm Socket Head Cap Screw (pack of 100)  76202-100
• 2 - M3 x 10mm Button Head Cap Screw (pack of 50)  76203-50
• 3 - M3 Kep Nut (pack of 100)  76204-100
• 2 - M3 Nyloc Nut (pack of 100)  76205-100
• 1 - M3 x 30mm Socket Head Cap Screw (pack of 50)  76206-50
• 1 - M3 x 20mm Socket Head Cap Screw (pack of 50)  76209-50
• 1 - 2.5mm Hex Ball End Screwdriver  70142
• 1 - Combination Wrench 5.5mm  70145

Studica First Person View (FPV) System for WorldSkills Mobile Robotics.

Featuring a Small lightweight video transmitter, 650TVL Camera with 2.8mm Wide angle lenses, and a 7-inch LCD HD screen.

MAIN FEATURES

• LCD
  • Small and lightest video transmitter
  • 5V-22V input
  • 25mW / 200mW power settings
  • Ultra-clean transmission
  • Robust RF amplifier
  • Clean powerup and video switching
  • LCD screen feature integrated 5.8Ghx Dual Diversity Receiver and automatic signal search (Supports 40 channels)
• Camera
  • "Zero" latency (less than 1ms end to end)
  • 650 TVL - the highest possible resolution without adding additional latency
  • Tuned both for day and night flying
  • 2.8mm wide angle lens
  • Lightweight plastic enclosure, matching popular older cameras for mounting compatibility
  • Wide voltage input range (5V - 22V)
• 5G8 MMCX Linear Antenna with MMCX connector
• UNIFY PRO 5G8 HV Video Transmitter
  • ​Smallest, lightest video transmitter on the market
  • 2-6S input power supported
  • 25mW / 100mW / 400mW power settings
  • Integrated heat sink
  • Ultra-clean transmission (up to 16 pilots at once!)
  • PitMode - power up your quad during a race
  • Easy OSD, FC and RC channel changes, with fallback button menu
  • Robust RF amplifier allows powering up without antenna for hours!
  • Clean powerup and video switching
• CE certified

The Flange Bearing 14mm OD fits any of the channel and flat brackets with the common hole pattern having a center hole of 14mm. The inside diameter will fit any of the D-Shaft axels.

• Quantity: 12
• Material: AISI440C stainless steel
• Sealed Type: ZZ metal shields
• Precision: ABEC-3
• Clearance: C0
• Lubrication:Kyodo SRL Grease
• ID (inner diameter)/Bore:6 mm
• OD (outer diameter): 14 mm
• OD of Flanged Size: 15 mm
• Width: 5 mm
• Thickness of Flange: 1 mm
• Step File

Includes,

• 2 - 432mm x 40mm Flat Bracket  76058
• 2 - 384mm x 40mm Flat Bracket  76059
• 2 - 336mm x 40mm Flat Bracket  76060
• 1 - 288mm x 40mm Flat Bracket  76061-2
• 2 - 240mm x 40mm Flat Bracket  76062
• 1 - 192mm x 40mm Flat Bracket  76063-2
• 1 - 144mm x 40mm Flat Bracket  76064-2
• 1 - 96mm x 40mm Flat Bracket  76065-2
• 1 - 192mm x 96mm Flat Bracket (2 pack)  76066-2

Includes,

• 3 - 32 Tooth Gear (2 pack)  76220-2
• 3 - 64 Tooth Gear (2 pack)  76221-2
• 2 - 128 Tooth Gear  76222
• 4 - 6mm Shaft Hub (4 pack)  76284-4
• 1 - M3 x 12mm Socket Head Cap Screw (pack of 100)  76202-100

This GT2 (also called 2GT) timing belt has a 2mm Pitch, 6mm width, and open 1000mm in length. Use any of the GT2 pulleys from Studica and the clamp kit.

Specifications:

• type: GT2 open-loop
• pitch: 2 mm
• width: 6 mm
• material: neoprene rubber, fiberglass reinforced
• belt shape: circular tooth profile